ED Decision 2003/2/RM
Each oil tank must be designed and installed so that –
(a) It can withstand, without failure, each vibration, inertia, and fluid load that it may be subjected to in operation; and
(b) It meets the provisions of CS 25.965, except –
(1) The test pressure –
(i) For pressurised tanks used with a turbine engine, may not be less than 34 kPa (5 psi) plus the maximum operating pressure of the tank instead of the pressure specified in CS 25.965(a); and
(ii) For all other tanks, may not be less than 34 kPa (5 psi) instead of the pressure specified in CS 25.965(a); and
(2) The test fluid must be oil at 121°C (250°F) instead of the fluid specified in CS 25.965(c).
Loading collections...