CS-25 Amdt 27 - Large Aeroplanes (Jan 2023)

Browse all sections of CS-25 Amdt 27 - Large Aeroplanes (Jan 2023)

AMC 25.1091(d)(2) Precipitation Covered Runways
I 25.1 General
CS 25.803 Emergency evacuation
CS 25.25 Weight Limits
AMC 25.101(i) Performance determination with worn brakes
CS 25.943 Negative acceleration
CS 25.1324 Flight instrument external probes
H25.3 Content
CS 25.1091 Air intake
CS 25.331 Symmetric manoeuvring conditions
AMC 25.795(c)(2) Survivability of systems
Note from the editor
AMC 25.491 Taxy, take-off and landing roll - tables
CS 25J1123 Exhaust piping
AMC 25.1447(c)(2) Equipment standards for oxygen dispensing units
CS 25.1351 General
AMC 25.1717 Circuit protective devices: EWIS
CS 25.791 Passenger information signs and placards
AMC 25.809(a) Emergency exit outside viewing
CS 25.1709 System Safety
AMC No. 1 to 25.301(b) Loads
STALLS
CS 25.625 Fitting factors
CS 25.302 Interaction of systems and structures
AMC 25.856(a) Thermal/acoustic insulation materials: Flame propagation resistance
CS 25.959 Unusable fuel supply
AMC 25.795 Security considerations
AMC 25.349(a) Rolling conditions
CS 25.1207 Compliance
CS 25.181 Dynamic stability
AMC 25.1541 Markings and placards -- General
AMC 25.723 Shock absorption tests
PRESSURISATION
AMC 25.1447(c) Equipment standards for oxygen dispensing units
AMC to Appendix H, H25.5 Instructions for Continued Airworthiness applicable to EWIS
CS 25.337 Limit manoeuvring load factors
CS 25.1363 Electrical system tests
SUBPART B – FLIGHT
AMC 25.791 Passenger information signs and placards
AMC 25.1523 Minimum flight crew
AMC 25.733(f) Tyre inflation pressure check
AMC 25.1302 Appendix 2: Definitions and acronyms
AMC 25.831(a) Ventilation
CS 25.231 Longitudinal stability and control
AMC 25.1533(a)(3) Take-off distances on runways with a grooved or porous friction course surface
N25.4 Variables and data tables
CS 25.1199 Extinguishing agent containers
AMC 25.815 Width of aisle
Part VI - Test Method to Determine the Flammability and Flame Propagation Characteristics of Thermal/Acoustic Insulation Materials
AEROPLANE FLIGHT MANUAL
Part VII - Test Method to Determine the Burnthrough Resistance of Thermal/Acoustic Insulation Materials
AMC 25.1557(a) Baggage and Cargo Compartment and Ballast Location
CS 25.251 Vibration and buffeting
AMC 25.147(f) Lateral control: All engines operating
CS 25.697 Lift and drag devices, controls
CS 25.973 Fuel tank filler connection
CS 25.723 Shock absorption tests
S25.10 General Cabin Arrangement
AMC 25.954 Fuel system lightning protection
Appendix 6 - Head-Up Display
AMC 25.1305(a)(2) Fuel indication system(s)
CS 25.1189 Shut-off means
AMC 25.621 Casting Factors
AMC to Appendix S, S25.10(c) Isolated Compartments
AMC 25.965(a) Fuel tank tests
CS 25.343 Design fuel and oil loads
AMC 25.855 and 25.857 Cargo or baggage compartments
Appendix 4 - Acronyms Used in this AMC
AMC 25.571 Damage tolerance and fatigue evaluation of structure
CS 25.865 Fire protection of flight controls, engine mounts, and other flight structure
SUBPART A – GENERAL
CS 25.499 Nose-wheel yaw and steering
CS 25.832 Cabin ozone concentration
AMC 25.1043 Cooling tests
CS 25.1435 Hydraulic Systems
CS 25.1305 Powerplant instruments
CS 25.1513 Minimum control speed
AMC 25-13 Reduced and derated take-off thrust (power) procedures
AMC 25.979(d) Pressure fuelling systems
CS 25.731 Wheels
AMC 25.1701 Definition
K25.2 Effects of Systems on Structures
AMC 25J943 APU Operating Characteristics
AMC 25.1323(h) Airspeed indicating system
AMC 25.1435 Hydraulic Systems - Design, Test, Analysis and Certification
AMC 25.201(d) Stall demonstration
AMC 25.811(d) Sign Combination
CS 25J1193 APU compartment
SUBPART F – EQUIPMENT
CS 25J1337 APU instruments
AMC 25.994 Fuel system components
AMC 25.603 Suitability and durability of materials
CS 25.1563 Airspeed placard
CS 25J943 Negative acceleration
AMC 25.107(d) Take-off speeds
H25.1 General
CS 25.1415 Ditching equipment
EXHAUST SYSTEM
CS 25.812 Emergency lighting
CS 25.1705 Systems and Functions
AMC 25.812(b)(2) Emergency lighting
AMC 25.899 Electrical bonding and protection against static electricity
APPENDICES TO CS-25
CS 25.1021 Oil system drains
CS 25.503 Pivoting
Appendix 1 - Assessment methods
STABILITY
CS 25.1389 Position light distribution and intensities
AMC No 1 to CS 25.603(a) Suitability and durability of materials -- Experience or tests
AMC 25.561 General
CS 25J1191 Firewalls
AMC 25.201(a)(2) Stall demonstration
CS 25.941 Inlet, engine, and exhaust compatibility
AMC 25.851(a) Hand fire extinguishers
CS 25J1527 Ambient air temperature and operating altitude
CS 25.953 Fuel system independence
AMC 25.981(b)(2) Fuel tank flammability definitions
CS 25J1187 Drainage and ventilation of fire zones
CS 25.1182 Nacelle areas behind firewalls, and engine pod attaching structures containing flammable fluid lines
CS 25.793 Floor surfaces
CS 25.1 Applicability
CS 25.1045 Cooling test procedures
CS 25.397 Control system loads
CS 25.1501 General
CS 25.1529 Instructions for Continued Airworthiness
CS 25.1321 Arrangement and visibility
CS 25.125 Landing
AMC 25.149 Minimum control speeds
CS 25.175 Demonstration of static longitudinal stability
CS 25.1316 Electrical and electronic system lightning protection
Appendix 2 - Examples for Including Aural System Elements in an Alerting System
CS 25.863 Flammable fluid fire protection
AMC 25.807(e) Emergency Exits Uniformity
CS 25.1531 Manoeuvring flight load factors
AMC 25.393(a) Loads parallel to hinge line
EMERGENCY PROVISIONS
COOLING
AMC 25.1362 Electrical supplies for emergency conditions
CS 25.1145 Ignition switches
(SAL) 25.5 Safe operational and flight characteristics
CS 25.237 Wind velocities
AMC 25.1411(f) Life preserver stowage provisions
AMC 25.907 Propeller vibration
AMC 25.967(a)(3) Fuel tank installation
CS 25J1305 APU instruments
AMC 25.1323(d) Airspeed indicating system
AMC 25.1715 Electrical bonding and protection against static electricity: EWIS
AMC 25.811 Emergency exit marking
AMC 25.1121(a) General
I 25.6 Powerplant controls
CS 25.1553 Fuel quantity indicator
CS 25.427 Unsymmetrical loads
AMC 25.810(a)(1)(v) Deployment and inflation tests
AMC 25.863(a) Flammable fluid fire protection
CS 25.699 Lift and drag device indicator
AMC 25.341 Gust and Continuous Turbulence Design Criteria (Acceptable Means of Compliance)
S25.40 Markings and Placards
CS 25.391 Control surface loads: general
CS 25.605 Fabrication methods
FUEL SYSTEM COMPONENTS
AMC 25.107(e)(1)(iv) Take-off speeds
Appendix 2 - Artificial Ice Shapes
AMC 25.809(a)(3) Emergency exit arrangement
AMC 25.933(a)(1) Unwanted in-flight thrust reversal of turbojet thrust reversers
CS 25.787 Stowage compartments
CS 25.1165 Engine ignition systems
CS 25.1360 Precautions against injury
CS 25.367 Unsymmetrical loads due to engine failure
CS 25.954 Fuel system lightning protection
AMC 25.795(d) Security of chemical oxygen generators
AMC 25.143(h) Manoeuvre Capability
CS 25.855 Cargo or baggage compartments
AMC 25.963(d) Fuel tank strength in emergency landing conditions
AMC 25.810(a)(1)(iv) Capability of assisting means in wind conditions
CS 25.601 General
CS 25.407 Trim tab effects
CS 25J1041 General
AMC 25.103(d) Stall speed
CS 25.27 Centre of gravity limits
CS 25.1447 Equipment standards for oxygen dispensing units
CS 25.253 High-speed characteristics
CS 25.1181 Designated fire zones: regions included
AMC 25.1303(b)(5) Attitude Displays
Part I - Meteorology
AMC 25.1324 Flight instrument external probes
CS 25.1725 Powerplants
M25.1 Fuel tank flammability exposure requirements
AMC 25.1193(e)(4) and (f) Engine cowling retention
CS 25.735 Brakes and braking systems
CS 25.1547 Magnetic direction indicator
GROUND HANDLING CHARACTERISTICS
CS 25.981 Fuel tank explosion prevention
Appendix 2 - Safety Assessment Process Overview
AMC 25.963(a) Fuel tanks: General
INSTRUMENTS: INSTALLATION
CS 25.1511 Flap extended speed
AMC 25.803 Emergency evacuation
CS 25.937 Turbo-propeller-drag limiting systems
AMC 25.201(c)(2) Turning Flight Stalls At Higher Deceleration Rates
CS 25.1561 Safety equipment
CS 25J1201 Fire extinguishing system materials
AMC 25.561(b)(3) Commercial Accommodation Equipment
AMC 25-1 On-board weight and balance systems
CS 25.1729 Instructions for Continued Airworthiness
CS 25.1439 Protective breathing equipment
CS 25.393 Loads parallel to hinge line
CS 25.1093 Air intake system de-icing and anti-icing provisions
AMC 25.813 Emergency exit access
CS 25.619 Special factors
CS 25.977 Fuel tank outlet
CS 25.1423 Public address system
CS 25J1549 APU instruments
AMC 25.679(b) Control system gust locks
CS 25.1592 Performance information for assessing the landing distance
AMC 25.125(b)(3) Change of Configuration
AMC 25.21(g) Performance and handling characteristics in icing conditions
AMC 25.335(b)(1)(ii) Design Dive Speed - High speed protection function
AMC 25.1719 Accessibility provisions: EWIS
CS 25.993 Fuel system lines and fittings
S25.60 Security
AMC 25.609 Protection of structure
AMC 25.1545 Airspeed limitation information
AMC 25.1419 Ice Protection
CS 25.1017 Oil lines and fittings
AMC 25J955(a)(2)(iii) Fuel Flow
AMC 25.1583(k) Maximum Depth of Runway Contaminants for Take-off Operations
CS 25.671 General
AMC 25.1357(a) Circuit protective devices
MISCELLANEOUS FLIGHT REQUIREMENTS
CS 25.1727 Flammable Fluid Shutoff Means
TRIM
CS 25.1438 Pressurisation and low pressure pneumatic systems
Appendix C
CS 25.395 Control system
CS 25.1333 Instrument systems
FUEL SYSTEM
CS 25J1106 Bleed air duct systems
CS 25.415 Ground gust conditions
CS 25.563 Structural ditching provisions
CS 25.489 Ground handling conditions
CS 25.1015 Oil tank tests
AMC 25.1543 Instrument Markings - General
CS 25.1517 Rough air speed, VRA
CS 25.1325 Static pressure systems
CS 25.1443 Minimum mass flow of supplemental oxygen
Appendix 1: Analytical methods for determining Halon 1301 concentration levels
AMC 25.1197 Fire-Extinguishing Agents
AMC 25.903(e)(2) Engines
Appendix 3 - Methods for inspection threshold determination
CS 25.123 En-route flight paths
Appendix Q - Additional airworthiness requirements for approval of a Steep Approach Landing (SAL) capability
CS 25.1041 General
AMC 25.181 Dynamic stability
OIL SYSTEM
CS 25.321 General
AMC 25.362 Engine Failure Loads
AMC No. 2 to CS 25.101(c) General
CS 25.1153 Propeller feathering controls
AMC 25.149(e) Minimum control speed
CS 25.1431 Electronic equipment
SUPPLEMENTARY INFORMATION
AMC 25.509 Towbarless towing
AMC to Appendix S, S25.10(a) Interior Doors on Non-Commercially Operated Aeroplanes
GENERAL
I 25.2 Definitions
CS 25A1017 Oil lines and fittings
CS 25.485 Side load conditions
CS 25.685 Control system details
AMC 25.101(g) Go-around
AMC 25.125(c)(2) Landing
AMC 25.703 Take-off Configuration Warning Systems
AMC 25.810(c)(2) Emergency Evacuation
CS 25.1013 Oil tanks
Part V - Test Method to Determine the Smoke Emission Characteristics of Cabin Materials
CS 25.1507 Manoeuvring speed
CS 25.905 Propellers
AMC 25.603(b) Suitability and durability of materials -- Approved material specifications and material process specifications
AMC 25.851(b) Built-in Fire Extinguishers for Cargo Compartments
CS 25.581 Lightning protection
CS 25.1161 Fuel jettisoning system controls
CS 25.621 Casting factors
CS 25.255 Out-of-trim characteristics
AMC 25.793 and 25.810(c) Floor surfaces
CS 25.335 Design airspeeds
Appendix 1 - Airframe Ice Accretion
CS 25.934 Turbo-jet engine thrust reverser system tests
CS 25J993 Fuel system lines and fittings
CS 25.841 Pressurised cabins
AMC to Appendix N, N25.1(b) Qualitative fuel tank flammability assessment
CS 25J1501 General
Appendix 4 - Examples of changes that may require full-scale fatigue testing
I 25.7 Powerplant instruments
AMC 25.1459 Flight data recorders
AIR INTAKE SYSTEM
AMC 25.1357(f) System Power Removal
CS 25.341 Gust and turbulence loads
CS 25.1549 Powerplant instruments
CS 25.857 Cargo compartment classification
Appendix 3 - Calculation of the average probability per flight hour
CS 25.1043 Cooling tests
AMC 25.773 Pilot compartment view
CS 25.1521 Powerplant limitations
AMC to Appendix S, S25.1 Passenger seating configuration
CS 25J1181 Designated fire zones
AMC 25.795(a)(1) Flightdeck intrusion resistance
CS 25.1301 Function and installation
CS 25.904 Automatic Takeoff Thrust Control System (ATTCS)
CS 25.854 Lavatory fire protection
AMC to Appendix S, S25.20(a)(1) Flammability of Bed Mattresses
Appendix O - Supercooled Large Drop icing conditions
AMC 25.1326 Flight instrument external probes heating systems alert
SUBPART H – ELECTRICAL WIRING INTERCONNECTION SYSTEMS
CS 25.1731 Powerplant and APU fire detector system
AMC 25.1438 Pressurisation and low pressure pneumatic systems
AMC 25.1193(e) Engine cowling and nacelle skin, APU compartment external skin
AMC 25.621(c)(1) Premium Castings
CS 25.995 Fuel valves
CS 25.689 Cable systems
CS 25.493 Braked roll conditions
AMC 25.1323(e) Airspeed indicating system
CS 25.807 Emergency exits
CS 25.373 Speed control devices
CS 25.969 Fuel tank expansion space
CS 25J1165 APU ignition systems
CS 25.777 Cockpit controls
CS 25.734 Protection against wheel and tyre failures
CS 25.1303 Flight and navigation instruments
AMC 25.119 Landing climb: all-engines-operating
CS 25J1551 Oil quantity indicator
CS 25.1411 General
I 25.3 Performance requirements
AMC 25.361 Engine and auxiliary power unit torque
LIGHTS
AMC 25.853 Compartment interiors
CS 25.819 Lower deck service compartments (including galleys)
H25.5 Electrical Wiring Interconnection System Instructions for Continued Airworthiness
CS 25.1103 Air intake system ducts and air duct systems
CS 25.703 Take-off warning system
CS 25.561 General
AMC 25.1713 Fire protection: EWIS
CS 25.1310 Power source capacity and distribution
CS 25.979 Pressure fuelling system
CS 25.679 Control system gust locks
APU CONTROLS AND ACCESSORIES
CS 25J1189 Shut-off means
CS 25.1011 General
AMC 25.729 Extending retracting mechanisms
CS 25.1503 Airspeed limitations: general
CS 25.1403 Wing icing detection lights
S25.30 Circulation Inside Cabin During Flight
CS 25J1043 Cooling tests
AMC 25.1581, Appendix 2 Aeroplane Flight Manual Specification
FATIGUE EVALUATION
AMC 25.735(f) Brakes
AMC 25.1363 Electrical systems tests
(SAL) 25.1 Applicability
CS 25.788 Passenger amenities
CS 25J1203 Fire-detector system
AMC 25.365(e) Pressurised compartment loads
S25.20 Emergency Evacuation
CS 25.1183 Flammable fluid-carrying components
AMC 25.1027 Inadvertent Propeller Feathering
CS 25.961 Fuel system hot weather operation
AMC 25.109(f) Accelerate-stop distance: credit for reverse thrust.
AMC 25.251(e) Vibration and Buffeting in Cruising Flight
AMC to Appendix H, H25.4(a)(3) Mandatory replacement time of EWIS components as defined in CS 25.1701
CS 25.875 Reinforcement near propellers
MISCELLANEOUS EQUIPMENT
CS 25.681 Limit load static tests
CS 25J1023 Oil radiators
CS 25.994 Fuel system components
Part III - Test Method to Determine Flame Penetration Resistance of Cargo Compartment Liners
Appendix F
SAFETY EQUIPMENT
AMC 25.1441(b) Risk assessment related to oxygen fire hazards in gaseous oxygen systems
CS 25.1723 Flammable fluid protection
AMC 25.1302 Installed Systems and Equipment for Use by the Flight Crew
CS 25.1317 High-Intensity Radiated Fields (HIRF) protection
CS 25.1433 Vacuum systems
AMC 25.1583(i) Manoeuvring Flight Load Factors
K25.1 General
AMC No.2 to CS 25.1329 Flight Testing of Flight Guidance Systems
GENERAL
CS 25.851 Fire extinguishers
AMC 25.854 Lavatory Fire Protection
AMC 25.963(e) Fuel Tank Protection
AMC 25.735 Brakes and Braking Systems Certification Tests and Analysis
CS 25.1185 Flammable fluids
AMC 25.795(c)(1) Least risk bomb location
Part I - Test Criteria and Procedures for Showing Compliance with CS 25.853, 25.855 or 25.869
AMC 25-11 Electronic Flight Deck Displays
CS 25.831 Ventilation
AMC 25.812 Emergency lighting
AMC to Appendix S, S25.40(b) Briefing Card Placard
PERSONNEL AND CARGO ACCOMMODATIONS
CS 25.1585 Operating procedures
CS 25.105 Take-off
AMC 25.177(d) Full Rudder Sideslips
CS 25J1121 General
CS 25.303 Factor of safety
CS 25.101 General
AMC 25.734 Protection against wheel and tyre failures
CS 25J1141 APU controls
(SAL) 25.4 Climb: One-engine-inoperative
AMC 25.103(b) Stalling speed
AMC 25.955(a)(4) Fuel flow
AMC 25.1592 The derivation and methodology of performance information for use when landing on slippery wet and contaminated runways to support the dispatch of a flight, and landing assessment performance at the time of arrival in all runway surface conditions
AMC 25.255 Out-of-trim characteristics
CS 25.1459 Flight data recorders
AMC 25.1091(e) Air Intake System
CS 25.1353 Electrical equipment and installations
CS 25.1445 Equipment standards for the oxygen distributing system
CS 25.571 Damage tolerance and fatigue evaluation of structure
CS 25.781 Cockpit control knob shape
CS 25.1195 Fire-extinguisher systems
POWERPLANT FIRE PROTECTION
AMC 25.773(c) Internal windshield and window fogging
FLIGHT MANOEUVRE AND GUST CONDITIONS
Appendix 3 - Design Features
CS 25.1187 Drainage and ventilation of fire zones
CS 25.801 Ditching
CS 25.999 Fuel systems drains
AMC 25.701(d) Flap and slat interconnection
CS 25.701 Flap and slat interconnection
CS 25.1519 Weight, centre of gravity and weight distribution
CS 25.459 Special devices
M25.3 Reliability indications and maintenance access
AMC 25.1351(d) Operation without Normal Electrical Power
CS 25.675 Stops
AMC 25.101(h)(3) General
FLIGHT LOADS
CS 25.1525 Kinds of operation
CS 25J1199 Extinguishing agent containers
Part II - Flammability of Seat Cushions
AMC 25.1301(a)(2) Function and installation
AMC 25.705 Runway overrun awareness and alerting systems
CS 25.789 Retention of items of mass in passenger and crew compartments and galleys
AMC to Appendix S, S25.20(b)(2) Comparative assessment of evacuation capability
CS 25.1449 Means for determining use of oxygen
AMC to Appendix S, S25.50(b) Cabin Attendant Direct View
CS 25.145 Longitudinal control
CS 25.121 Climb: one-engine-inoperative
CS 25.611 Accessibility provisions
Appendix L
CS 25.1309 Equipment, systems and installations
CS 25.29 Empty weight and corresponding centre of gravity
CS 25.20 Scope
AMC 25.1305(d)(1) Powerplant instruments
OIL SYSTEM
CS 25.1515 Landing gear speeds
AMC 25.819 Lower deck service compartments (including galleys)
AMC 25.109(c)(2) Accelerate-stop distance: anti-skid system efficiency
CS 25.115 Take-off flight path
CS 25.858 Cargo or baggage compartment smoke or fire detection systems
CS 25.1461 Equipment containing high-energy rotors
CS 25.1319 Equipment, systems and network information protection
AMC 25.351 Yaw manoeuvre conditions
CS 25.975 Fuel tank vents
CONTROL SURFACE AND SYSTEM LOADS
AMC 25.1351(b)(6) Generating System
S25.50 Cabin Attendant Direct View
AMC 25.1441(c) Oxygen chemical generators and small sealed, one-time use gaseous oxygen bottles
AMC to Appendix N, N25.1(a) Fuel tank flammability assessment method
CS 25.965 Fuel tank tests
EXHAUST SYSTEM
CS 25.1331 Instruments using a power supply
CS 25J977 Fuel Tank Outlet
AMC 25.1302 APPENDIX 1: Related regulatory material and documents
CS 25.672 Stability augmentation and automatic and power-operated systems
Appendix 5 - Definitions
AMC 25.331(c)(2) Checked manoeuvre between VA and VD
CS 25.161 Trim
AMC 25.145(f) Longitudinal control - go-around
CS 25.785 Seats, berths, safety belts and harnesses
CS 25.113 Take-off distance and take-off run
CS 25.1457 Cockpit voice recorders
AMC 25J1041 General
GENERAL
AMC to Appendix S, S25.20(b)(1) Ensuring removal of in-flight obstructions before take-off and landing
AMC 25.1703 Function And Installation
CS 25.1001 Fuel jettisoning system
AMC 25.1353(c)(6)(ii) and (iii) Electrical equipment and installations
CS 25.963 Fuel tanks: general
M25.4 Airworthiness limitations and procedures
CS 25.929 Propeller de-icing
CONTROLLABILITY AND MANOEUVRABILITY
CS 25.507 Reversed braking
AMC No. 2 to 25.301(b) Flight Load Validation
CS 25.677 Trim systems
CS 25.473 Landing load conditions and assumptions
CS 25J991 Fuel Pumps
I 25.4 Reliability requirements
AMC 25.143(d) Controllability and Manoeuvrability
AMC 25.901(b)(4) Electrical Bonding
AMC 25.109(a) and (b) Accelerate-stop distance
Appendix A
AMC 25.491 Taxy, take-off and landing roll
AMC 25.795(c)(3) Interior design to facilitate searches
AMC No. 2 to CS 25.107(e)(4) Take-off speeds
FIRE PROTECTION
CS 25J961 Fuel system hot weather operation
AMC 25.561(d) General
CS 25.815 Width of aisle
CS 25.207 Stall warning
Preamble
AMC 25.795(b)(1) Flight deck smoke protection
COOLING
CS 25.1436 Pneumatic systems - high pressure
CS 25.997 Fuel strainer or filter
AMC 25.1721 Protection of EWIS
AMC 25.745(c) Nose-wheel steering
Appendix A - Safety Assessment
CS 25.952 Fuel system analysis and test
CS 25.657 Hinges
N25.1 General
I 25.5 Thrust or power setting
VENTILATION AND HEATING
CS 25J1025 Oil valves
AMC 25.1333(b) Instruments systems
AMC 25.773(b)(4) Pilot compartment non openable windows
CS 25.1365 Electrical appliances, motors and transformers
CS 25J951 General
AMC 25.207(b) Stall warning
AMC 25.1141(f) Powerplant controls, general
CS 25.1516 Other speed limitations
CS 25.399 Dual control system
APU FIRE PROTECTION
CS 25.1123 Exhaust piping
CS 25J1197 Fire extinguishing agents
AMC 25.1403 Wing icing detection lights
AMC 25.1457 Cockpit voice recorders
CS 25.775 Windshields and windows
Part I - Atmospheric Icing Conditions
AMC 25.831(c) Ventilation
AMC 25.145(a) Longitudinal control - Control near the stall
CS25J1011 Oil System General
AMC 25.981(b)(1) Fuel tank flammability design precautions
AMC 25.869(a)(1) Electrical System Fire and Smoke Protection
AMC 25.811(e)(4) Emergency exit marking
CS 25.361 Engine and auxiliary power unit torque
CS 25.771 Pilot compartment
CS 25.1143 Engine controls
AMC to Appendix S, S25.10(b) Interior Doors on Commercially Operated Aeroplanes
CS 25.811 Emergency exit marking
CS 25J1583 Operating limitations
CS 25.491 Taxi, take-off and landing roll
CS 25.1019 Oil strainer or filter
AMC 25.207(c) and (d) Stall warning
Appendix K – Interaction of Systems and Structure
AMC 25.143(a) and (b) Controllability and Manoeuvrability
AMC 25J901(c)(4) Electrical Bonding
Appendix 1 - Crack growth analysis and tests
AMC 25.333(b) Manoeuvring envelope
AMC 25.149(h)(4) Minimum control speeds
AMC 25.1709 System safety
CS 25.31 Removable ballast
AMC 25.939(c) Turbine engine operating characteristics
Appendix D
AMC 25.1707 System separation
AMC 25.1365 Electrical appliances, motors and transformers
Appendix R - HIRF Environments and Equipment HIRF Test Levels
CS 25.371 Gyroscopic loads
CS 25.1357 Circuit protective devices
AMC 25.121 Climb: One-engine-inoperative
AMC 25.123 En-route flight paths
AMC 25.1309 System design and analysis
AMC 25.621(c) Critical Castings
CS 25.1155 Reverse thrust and propeller pitch settings below the flight regime
CS 25.1302 Installed systems and equipment for use by the flight crew
AMC 25.905(d) Release of Propeller Debris
CS 25J997 Fuel strainer or filter
CS 25.481 Tail-down landing conditions
CS 25.365 Pressurised compartment loads
AMC 25.605(a) Fabrication methods -- Approved process specifications
AMC 25.111(b) Take-off path
CS 25.1587 Performance information
CS 25J952 Fuel system analysis and test
SUBPART C – STRUCTURE
CS 25.1460 Data link recorders
CS 25.173 Static longitudinal stability
AMC 25.121(a)(1) Climb: One-engine-inoperative
CS 25.1327 Direction Indicator
CS 25.177 Static directional and lateral stability
AMC 25.785(h)(2) Cabin Attendant Direct View
N25.2 Definitions
CS 25.107 Take-off speeds
AMC 25.21(d) Proof of compliance
AMC 25.1103(d) Air intake system ducts
CS 25.1307 Miscellaneous equipment
CS 25.867 Fire protection: other components
CS 25.1323 Airspeed indicating system
AMC 25.147(d) Lateral control: Roll capability
CS 25.856 Thermal/acoustic insulation materials
AMC 25J991 Fuel Pumps
AMC 25.337 Limit manoeuvring load factors
CS 25.833 Combustion heating systems
CS 25.1707 System Separation
CONTROL SURFACES
Appendix 3 - Regulations
Part II - Airframe ice accretions
AMC to Appendix Q, (SAL) 25.5 Safe operational and flight characteristics
AMC 25.1549 Powerplant instruments
AMC 25.1303(c)(1) Flight and navigation instruments
CS 25.1583 Operating limitations
CS 25.519 Jacking and tie-down provisions
CS 25.1555 Control markings
Appendix 5 - Related Acceptable Means of Compliance (AMC) and FAA Advisory Circulars (AC)
CS 25J1045 Cooling test procedures
AMC 25.745(d) Nose-wheel steering
AMC 25J1195(b) Fire extinguisher systems
CS 25.795 Security considerations
FUEL SYSTEM COMPONENTS
AMC 25.685(a) Control system details
AMC 25.810 Emergency egress assisting means and escape routes
CS 25.933 Reversing systems
CS 25.705 Runway overrun awareness and alerting systems
Disclaimer
CS 25.1149 Propeller speed and pitch controls
AMC 25.149(h)(3) Minimum control speeds
CS 25.783 Fuselage Doors
AMC 25.851(a)(1) Hand fire extinguishers
AEROPLANE FLIGHT MANUAL
CS 25.171 General
CS 25.871 Levelling means
AMC 25.785(g) Seats, berths, safety belts and harnesses
AMC 25.307 Proof of structure
Appendix 2 - Full-scale fatigue test evidence
CS 25J1557 Miscellaneous markings and placards
AMC 25.963(g) Fuel tanks: General
Appendix 1 - Examples for Including Visual System Elements in an Alerting System
AMC to Appendix S, S25.30(a) Width of Aisle
CS 25.721 General
CS 25.477 Landing gear arrangement
AMC 25.901(b)(2) Assembly of Components
MARKINGS AND PLACARDS
CS 25.607 Fasteners
M25.2 Showing compliance
CS 25.820 Lavatory doors
AMC 25.415 Ground gust conditions
CS 25.111 Take-off path
AMC 25.851(a)(2) Hand fire extinguishers
CS 25.1420 Supercooled large drop icing conditions
CS 25.967 Fuel tank installations
PERFORMANCE
AMC 25.807 Emergency exits
AMC 25.807(f) Passenger emergency exits
CS 25.853 Compartment interiors
AMC 25.745(a) Nose-wheel steering
CS 25.307 Proof of structure
CS 25.609 Protection of structure
AMC 25.103(c) Stall speed
AMC 25.607 Fasteners
CS 25.1023 Oil radiators
AMC No 2 to CS 25.603(a) Suitability and durability of materials -- Large glass items
AMC 25-19 Certification Maintenance Requirements
AMC 25.856(b) Thermal/acoustic insulation materials: Flame penetration (Burnthrough) resistance
EMERGENCY LANDING CONDITIONS
CS 25.955 Fuel flow
AMC 25.1436(b)(3) Pneumatic Systems
(SAL) 25.3 Steep Approach Landing Distance
CS 25.651 Proof of strength
CS 25.333 Flight manoeuvring envelope
Appendix 5 - PSE, FCS, and WFD-susceptible structure
AMC 25.1315 Negative accelerations
(SAL) 25.2 Definitions
CS 25.1421 Megaphones
CS 25J1093 Air intake system icing protection
AMC to Appendix S, S25.40(c) Seats in Excess
AMC 25.353 Rudder control reversal conditions
CS 25.810 Emergency egress assisting means and escape routes
AMC 25.812(e)(2) Emergency lighting
MISCELLANEOUS
CS 25.1027 Propeller feathering system
CS 25.843 Tests for pressurised cabins
CS 25.1121 General
OPERATING LIMITATIONS
CS 25.445 Outboard fins
CS 25.779 Motion and effect of cockpit controls
AMC 25.1447(c)(1) Equipment standards for oxygen-dispensing units
CS 25.1701 Definition
CS 25.21 Proof of compliance
AMC to Appendix S, S25.20(b) Exit as effective as a Type IV exit
AMC 25.1521 Power-plant limitations
CS 25.957 Flow between interconnected tanks
AMC to Appendix S, S25.30(b) Firm Handholds
AMC 25.1355(c) Distribution system
CS 25.613 Material strength properties and Material Design Values
CS 25.119 Landing climb: all engines operating
CS 25.925 Propeller clearance
AMC to CS 25.1319 Equipment, systems and network information security protection
AMC 25.813(c) Emergency Exit Access and Ease of Operation
CS 25.1337 Powerplant instruments
H25.6 Information system security Instructions for Continued Airworthiness
CS 25.487 Rebound landing condition
CS 25.201 Stall demonstration
CS 25.511 Ground load: unsymmetrical loads on multiple-wheel units
ELECTRICAL SYSTEMS AND EQUIPMENT
AMC 25.201(d)(3) Stall demonstration
Appendix J - Emergency Demonstration
AMC 25.775(d) Windshields and windows
CS 25.1385 Position light system installation
AMC 25.113(a)(2), (b)(2) and (c)(2) Take-off distance and take-off run
CS 25.693 Joints
CS 25.1401 Anti-collision light system
AMC 25.813(e) Interior Doors
CS 25.1455 Draining of fluids subject to freezing
AMC 25.1327 Direction Indicator
AMC 25.1353(a) Electrical equipment and installations
CS 25.1315 Negative acceleration
AMC 25.788(a) Installation of Showers
CS 25J939 APU operating characteristics
GENERAL
SUBPART J – AUXILIARY POWER UNIT INSTALLATIONS
CS 25.813 Emergency exit access and ease of operation
CS 25.631 Bird strike damage
CS 25.362 Engine failure loads
CS 25.1203 Fire-detector system
CS 25.1163 Powerplant accessories
CS 25.772 Pilot compartment doors
CS 25.1419 Ice Protection
AMC 25.1587(c) Landing distances in abnormal configurations
CS 25.495 Turning
CS 25.1025 Oil valves
AMC 25.1360(a) Precaution against injury
AMC 25.1447(c)(3) Equipment standards for oxygen-dispensing units
CS 25.349 Rolling conditions
AMC 25.1189 Flammable fluid shut-off means
CS 25.1717 Circuit protective devices
GROUND LOADS
AMC 25.1581 Aeroplane flight manual
CS 25.1541 General
CS 25.1523 Minimum flight crew
AMC 25.101 General
CS 25.629 Aeroelastic stability requirements
CS 25.773 Pilot compartment view
AMC 25.795(b)(3) Cargo compartment fire suppression
CS 25.1393 Minimum intensities in any vertical plane of forward and rear position lights
CS 25.623 Bearing factors
AMC 25.109(d)(2) Accelerate-stop distance: anti-skid efficiency on grooved and porous friction course (PFC) runways.
CS 25.235 Taxying condition
AMC 25.562 Emergency landing dynamic conditions
CS 25.1441 Oxygen equipment and supply
CS 25.1197 Fire-extinguishing agents
AMC 25.787(b) Stowage compartments
CS 25J1183 Lines, fittings and components
AMC 25.143(b)(1) Control Following Engine Failure
AMC 25.145(b)(1), (b)(2) and (b)(3) Longitudinal control
CS 25.1381 Instrument lights
AMC 25.777(c) Full and unrestricted movement of cockpit controls
(SAL) 25.6 Aeroplane Flight Manual
AMC 25.1322 Alerting Systems
LANDING GEAR
Appendix 2 - Powerplant Displays
CS 25.457 Wing-flaps
Appendix 1 - Primary Flight Information
CS 25.1581 General
CS 25.1395 Maximum intensities in over-lapping beams of forward and rear position lights
AMC 25.1723 Flammable fluid protection: EWIS
CS 25.733 Tyres
Appendix 4 - Allowable Probabilities
MARKINGS AND PLACARDS
AMC No. 2 to CS 25.143(g) Controllability and Manoeuvrability
AMC 25.851(c) Alternative fire-extinguishing agents
AMC 25.1593 Exposure to volcanic cloud hazards
CS 25.907 Propeller vibration
AMC 25.121(a) Climb: One-engine-inoperative
AMC 25.629 Aeroelastic stability requirements
CS 25.991 Fuel pumps
CS 25.1721 Protection of EWIS
AMC 25.631 Bird strike damage
AMC 25.605(b) New fabrication methods -- Test programme
CS 25.305 Strength and deformation
AMC 25.812(b)(1) Emergency lighting
AMC 25.1303(a)(3) Direction indicators
CS 25.1355 Distribution system
AMC 25.173(c) Static longitudinal stability
AMC 25 Subpart H Correlation with previous amendment of CS-25
Appendix 3 - Definitions
AMC 25.1310(a) Power source capacity and distribution
CS 25.817 Maximum number of seats abreast
AMC 25.581 Lightning protection
Appendix P - Mixed phase and ice crystal icing envelope (Deep convective clouds)
CS 25J955 Fuel Flow
CS 25J994 Fuel system components
S25.1 General
AMC 25.939(a) Turbine engine operating characteristics
CS 25.1362 Electrical supplies for emergency conditions
CS 25.471 General
CS 25.479 Level landing conditions
CS 25.655 Installation
AMC 25.809(c) and (e) Testing of the opening of passengeroperated exits
AMC 25.929(a) Propeller de-icing
CS 25.1715 Electrical bonding and protection against static electricity
AMC 25.1351(b)(5) Generating System
H25.4 Airworthiness Limitations Section
POWERPLANT CONTROLS AND ACCESSORIES
AMC 25.1093(b) Power plant icing
CS 25.951 General
CS 25.1326 Flight instrument external probes heating systems alert
AMC 25.1501 Operating Limitations and Information - General
CS 25J1163 APU accessories
AMC 25.335(b)(2) Design Dive Speed
CS 25.117 Climb: general
CS 25.1383 Landing lights
AMC 25.801 Ditching
CS 25.33 Propeller speed and pitch limits
Appendix 7 - Weather Displays
Appendix A - Example of Calculation for Fuel-to-Air Ratio
SUPPLEMENTARY CONDITIONS
CS 25.497 Tail-wheel yawing
AMC 25.1441(d) Oxygen equipment and supply
AMC 25.1365(b) Installation of Cooktops
Appendix 4 - Related Documents
CS 25.233 Directional stability and control
Appendix N - Fuel Tank Flammability Exposure
Appendix H - Instructions for Continued Airworthiness
AMC 25.812(l)(1) Transverse Separation of the Fuselage
CS 25.405 Secondary control system
CS 25.1545 Airspeed limitation information
AMC 25.773(b)(1)(ii) Pilot compartment view in icing conditions
CS 25.903 Engines
AMC 25.331(c)(1) Maximum pitch control displacement at VA
CS 25.859 Combustion heater fire protection
CS 25.562 Emergency landing dynamic conditions
CS 25.1397 Colour specifications
Part IV - Test Method to Determine the Heat Release Rate from Cabin Materials Exposed to Radiant Heat
AMC 25.1519 Weight, centre of gravity and weight distribution
AMC 25-24 Sustained Engine Imbalance
CS 25.345 High lift devices
CS 25.409 Tabs
CS 25J901 Installation
AMC 25.345(a) High lift devices (Gust conditions)
AMC 25.785 Seats, Berths, Safety Belts and Harnesses
CS 25.301 Loads
AMC 25J1093(b) Essential APU air intake system de-icing and anti-icing provisions
CS 25.1711 Component identification
CS 25.1450 Chemical oxygen generators
CS 25.1391 Minimum intensities in the horizontal plane of forward and rear position lights
CS 25J1207 Compliance
AMC 25.975(a)(7) Fuel tank vent fire protection
CS 25J1185 Flammable fluids
Appendix 6 - Acronyms and definitions
AMC 25.203 Stall characteristics
CS 25J1019 Oil Filter
CS 25J953 Fuel system independence
AMC 25.939 Turbine engine operating characteristics
AMC 25.1027(b) Propeller Feathering
AMC 25.107(e)(3) Take-off speeds
CS 25J995 Fuel valves
AMC 25.809 Emergency exit arrangement
AMC 25.613 Material strength properties and material design values
Part II - Airframe Ice Accretions
CS 25.147 Directional and lateral control
CS 25.1505 Maximum operating limit speed
AMC 25.1591 The derivation and methodology of performance information for use when taking-off from slippery wet and contaminated runways
AMC 25.1305(c)(5) Powerplant ice protection system functioning indication
CS 25.1453 Protection of oxygen equipment from rupture
AMC 25.1581, Appendix 1 Computerised Aeroplane Flight Manual
CS 25.1141 Powerplant controls: general
AMC to Appendix S, S25.10(d) and (e) Deactivation of existing Emergency Exits
AMC 25.1436(c)(2) Pneumatic Systems
FUEL SYSTEM
CS 25.603 Materials
AMC 25.1420 Supercooled large drop icing conditions
Appendix M – Fuel Tank Flammability Reduction Means (FRM)
CS 25.809 Emergency exit arrangement
AMC 25.143(b)(4) Go-around Manoeuvres
CS 25.1719 Accessibility Provisions
Incorporated amendments
OPERATING LIMITATIONS
CS 25.1322 Flight Crew Alerting
Appendix S - Airworthiness requirements for non-commercially operated aeroplanes and low-occupancy aeroplanes
CS 25.971 Fuel tank sump
CS 25.509 Towing Loads
AMC 25.201(b)(1) Stall demonstration
N25.3 Fuel tank flammability exposure analysis
CS 25.939 Turbine engine operating characteristics
CS 25.1557 Miscellaneous markings and placards
AMC 25.345(c) High lift devices (Procedure flight condition)
AMC 25.177(c) Steady, Straight Sideslips
AMC 25.981(a) Fuel Tank Ignition Source Prevention
CS 25.23 Load distribution limits
CS 25.1167 Accessory gearboxes
AMC 25.1360(b) Precaution against injury
CS 25.729 Extending and retracting mechanisms
AMC 25.679(a)(2) Control system gust locks
SUBPART D – DESIGN AND CONSTRUCTION
AMC 25J901(c)(2) Assembly of Components
AMC 25.1181 Designated fire zones
AMC 25.795(b)(2) Passenger cabin smoke protection
CS 25.143 General
AMC 25.145(e) Longitudinal control
AMC 25.1447(c)(4) Equipment standards for oxygen dispensing units
CS 25.745 Nose-wheel steering
CS 25.351 Yaw manoeuvre conditions
AMC 25.1155 Reverse thrust and propeller pitch settings below the flight regime
CS 25.683 Operation tests
CS 25.363 Side load on engine and auxiliary power unit mounts
SUBPART E – POWERPLANT
AMC 25.788(b) Large Display Panels
CS 25J1091 Air intake
AMC No. 1 to CS 25.143(g) Controllability and Manoeuvrability
AMC 25.1711 Component identification
CS 25.1543 Instrument markings
CS 25.899 Electrical bonding and protection against static electricity
CS 25.1193 Cowling and nacelle skin
CS 25.203 Stall characteristics
AMC 25.1121(b) General
AMC 25.253(a)(4) Lateral Control: Roll Capability
CS 25J903 Auxiliary power unit
AMC to Appendix F, Part IV - Test Method to Determine the Heat Release Rate from Cabin Materials Exposed to Radiant Heat
CS 25.149 Minimum control speed
Appendix 4 - Examples of Aeroplane Flight Manual Limitations and Operating Procedures for Operations in Supercooled Large Drop Icing Conditions
CS 25.109 Accelerate-stop distance
CS 25J1195 Fire extinguisher systems
H25.2 Format
AMC 25.121(b)(1)(i) Climb: One-engine-inoperative
GENERAL
GENERAL
Appendix I – Automatic Takeoff Thrust Control System (ATTCS)
CS 25.1201 Fire extinguishing system materials
CS 25.483 One-gear landing conditions
CS 25.353 Rudder control reversal conditions
GENERAL
AIR INTAKE AND BLEED AIR DUCT SYSTEMS
AMC No. 1 to CS 25.107(e)(4) Take-off speeds
CS 25.1533 Additional operating limitations
AMC 25.125(c) Landing
AMC 25.1460 Data link recorders
AMC No. 1 to CS 25.1329 Flight Guidance System
CS 25.1591 Take-off performance information for operations on slippery wet and contaminated runways
AMC 25.903(d)(1) Torching Flames
AMC 25.795(a)(2) Flightdeck penetration resistance
AMC 25.111 Take-off path
CS 25.1387 Position light system dihedral angles
AMC No. 1 to CS 25.101(c) Extrapolation of Performance with Weight
GENERAL AMCs
CS 25.1535 ETOPS Design approval
AMC 25.253(a)(5) High Speed Characteristics
CS 25J1021 Oil system drains
LIGHTNING PROTECTION
AMC 25.147(a) Directional control
AMC 25.149(g) Minimum Control Speed with Two Inoperative Engines during Approach and Landing (VMCL-2)
CS 25.1713 Fire Protection
AMC 25.145(b)(2) Longitudinal control
CS 25J1521 APU limitations
AMC 25.869(c) Fire Protection for Oxygen Equipment
CS 25.1593 Exposure to volcanic cloud hazards
CS 25J1103 Air intake system ducts
SUBPART G – OPERATING LIMITATIONS AND INFORMATION
AMC 25.149(f) Minimum Control Speed during Approach and Landing (VMCL)
CS 25.1703 Function and Installation
CS 25.103 Stall speed
CS 25.1527 Ambient air temperature and operating altitude
AMC 25.1195(b) Fire extinguisher systems
CS 25.945 Thrust or power augmentation system
CONTROL SYSTEMS
CS 25.1329 Flight Guidance System
CS 25.869 Fire protection: systems
CS 25.1551 Oil quantity indicator
CS 25.1191 Firewalls
CS 25.901 Installation
AMC 25.901(c) Safety Assessment of Powerplant Installations
AMC 25.671 Control Systems -- General

Table of contents