Browse all sections of GM Remote Aerodrome Air Traffic Services (ED 2019/004/R) Issue 2 (Jul 2020)

• GM1 ACNS.C.PBN.905 Fixed radius transition (FRT) requirements
• CS ACNS.D.ADSB.035 ICAO 24-bit Aircraft address
• GM1 ACNS.E.LAD.230 Continued operation after losing normal electrical power
• Subsection 10 – Supplementary specifications supporting parallel offset
• CS ACNS.D.ADSB.085 Geometric Altitude
• General
• AMC2 ACNS.E.LAD.320 Flight dynamics and locating the aircraft
• CS ACNS.E.RVSM.025 Continuity
• AMC1 ACNS.C.PBN.601 Applicability
• AMC1 ACNS.D.ADSB.070 Horizontal Position and Velocity Data Sources
• CS ACNS.E.LAD.610 Continuity
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• Appendix A - Background information on Mode A/C surveillance systems
• AMC1 ACNS.D.ELS.010 Transponder characteristics
• Display of navigation data
• CS ACNS.B.DLS.B1.075 CPDLC downlink messages
• Data link initiation capability (DLIC) service messages
• Appendices
• CS ACNS.E.LAD.150 Activation signals -- supplementary
• Display of navigation data
• CS ACNS.E.TAWS.001 Applicability
• Appendix C - Background information on terrain awareness and warning systems (TAWSs)
• AMC1 ACNS.C.PBN.250 'Direct-to' function
• APPLICABILITY
• GM1 ACNS.B.VCS.001 Applicability
• General
• APPLICABILITY
• GM2 ACNS.E.LAD.210 Normal operation
• Subsection 5 – Supplementary specifications for vertical navigation in final approach
• CS ACNS.C.PBN.1005 Parallel offset capabilities
• AMC1 ACNS.B.DLS.B1.070 CPDLC uplink messages
• AMC1 ACNS.D.ELS.015 Data transmission
• AMC1 ACNS.D.ELS.045 Continuity
• AMC1 ACNS.C.PBN.560 Vertical accuracy when using SBAS/GNSS geometric altitude sources
• CS ACNS.C.PBN.310 Final approach intercept
• GM1 ACNS.B.DLS.B1.075 Downlink messages
• AMC2 ACNS.C.PBN.205 RNP system approval
• Vertical performance
• AMC1 ACNS.C.PBN.575 RNP system design -- integrity in final approach
• AMC1 ACNS.B.DLS.B1.075 Downlink messages
• AMC1 ACNS.E.LAD.610 Continuity
• AMC2 ACNS.C.PBN.285 Display of active waypoint
• Appendix G - Example of Flight Manual Supplement for ADS-B out
• CS ACNS.E.LAD.120 Repeated transmission of the activation signals
• CS ACNS.C.PBN.225 Reasonableness check of distance-measuring equipment (DME)
• Appendix B - Examples of methods to establish and monitor staticsource errors (group aircraft only)
• Subpart B — Communications (COM)
• CS ACNS.B.DLS.B1.010 Flight Deck Interface
• ATN B1 data link
• Subsection 8 – Supplementary specifications supporting radius to fix (RF)
• General
• CS ACNS.E.LAD.140 Activation signals -- essential information
• CS ACNS.C.PBN.620 Reversion
• CS ACNS.B.DLS.B1.005 Installation Requirements
• AMC3 ACNS.E.LAD.320 Flight dynamics and locating the aircraft
• AMC1 ACNS.C.PBN.2140 Lateral navigation accuracy
• CS ACNS.D.ADSB.025 Provision of data
• Monitoring and alerting
• GM1 ACNS.C.PBN.680 RNP system design - RNP AR continuity
• AMC1 ACNS.D.ADSB.020(a-b) ADS-B Out data parameters
• Navigation database
• GM1 ACNS.B.DLS.B1.090 ATC Clearances and Information (ACL) Service
• CS ACNS.B.DLS.B1.070 CPDLC uplink messages
• AMC1 ACNS.E.LAD.320 Flight dynamics and locating the aircraft
• CS ACNS.C.PBN.820 Display of computed path
• ADS-B Out Data
• CS ACNS.C.PBN.570 Advisory VNAV
• AMC1 ACNS.B.DLS.B1.020 Data Link Services
• AMC1.ACNS.B.DLS.B1.015 Dual Data Link Capabilities (Dual stack)
• CS ACNS.E.TAWS.080 Pop-up mode
• AMC1 ACNS.C.PBN.235 Automatic leg sequencing
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• General
• General
• AMC1 ACNS.C.PBN.330 Non-numeric lateral deviation display scaling for approach
• CS ACNS.C.PBN.810 RNP failure
• Appendix I - On-the-ground status Test and Validation Guidance for Aeroplanes
• CS ACNS.D.ADSB.115 Horizontal Position and Velocity Total Latency
• AMC1 ACNS.E.TAWS.030 Terrain information display
• GM2 ACNS.B.DLS.B1.075 Downlink Messages
• GM1 ACNS.B.DLS.B1.035 DLS system continuity
• AMC1 ACNS.E.RVSM.005 RVSM system
• CS ACNS.C.PBN.725 Display of aircraft track
• GM2 ACNS.B.DLS.B1.070 Uplink Messages
• AMC1 ACNS.C.PBN.210 Position source
• AMC1 ACNS.C.PBN.260 RNAV holding
• GM1 ACNS.C.PBN.560 Vertical accuracy when using SBAS/GNSS geometric altitude sources
• GM1 ACNS.B.DLS.B1.005 Data Link System Installation
• AMC1 ACNS.C.PBN.520 Glide path intercept
• Appendix E - Differences between CS ACNS.D.EHS and EASA AMC 20-13
• CS ACNS.D.EHS.025 Continuity
• AMC1 ACNS.C.PBN.275 Display and entry of navigation data -- resolution
• AMC2 ACNS.E.LAD.410 Position accuracy for non-survivable accidents
• GM1 ACNS.E.LAD.310 Environmental and crash conditions encountered during accidents
• CS ACNS.E.TAWS.055 Terrain and airport information
• AMC1 ACNS.D.ADSB.090(b) Flight Deck Interface
• CS ACNS.C.PBN.275 Display and entry of navigation data -- resolution
• CS ACNS.C.PBN.1001 Applicability
• AMC1 ACNS.E.LAD.210 Normal operation
• AMC4 ACNS.E.LAD.310 Environmental and crash conditions encountered during accidents
• CS ACNS.E.RVSM.020 Integrity
• GM1 ACNS.C.PBN.2125 Extraction and display of navigation data
• GM1 ACNS.E.TAWS.001 Applicability
• GM1 ACNS.C.PBN.401 Applicability
• GM1 ACNS.E.LAD.240 Automatic activation
• Incorporated amendments
• GM1 ACNS.E.LAD.320 Flight dynamics and locating the aircraft
• APPLICABILITY
• GM1 ACNS.E.LAD.620 Integrity
• System performance requirements
• GM1 ACNS.B.DLS.B1.085 ATC Communications Management (ACM) Service
• Appendices
• GM1 ACNS.E.RVSM.035 Altimetry System Accuracy
• GM1 ACNS.B.DLS.B1.120 Application Layer Requirements
• GM1 ACNS.E.LAD.140 Activation signals -- essential information
• CS ACNS.C.PBN.240 Route/procedure extraction and loading
• AMC1 ACNS.B.DLS.B1.080 Data Link Initiation Capability (DLIC) Service
• Subsection 7 – Supplementary specifications for applications for advanced RNP (A-RNP)
• CS ACNS.C.PBN.575 RNP system design -- integrity in final approach
• CS ACNS.B.VCS.040 Flight Deck Interface
• Subpart E — Others
• AMC1 ACNS.E.TAWS.005 TAWS equipment approval
• AMC1 ACNS.D.ADSB.115 and 120 Horizontal Position and Velocity Total and Uncompensated Latency
• GM1 ACNS.E.LAD.410 Position accuracy for non-survivable accidents
• Flight deck control and indication capabilities
• CS ACNS.B.DLS.B1.055 DLIC Downlink Messages
• AMC1 ACNS.E.LAD.350 Means and procedures to prevent undesirable activation
• GM1 ACNS.C.PBN.675 RNP system design - RNP AR integrity
• CS ACNS.C.PBN.630 Radius to fix (RF) leg transition
• GM1 ACNS.E.TAWS.045 Continuity
• AMC1 ACNS.E.LAD.140 Activation signals -- essential information
• CS ACNS.C.PBN.580 RNP system design -- continuity
• GM1 ACNS.E.LAD.610 Continuity
• GM1 ACNS.E.LAD.001 Applicability and scope
• AMC1 ACNS.E.LAD.420 Position accuracy for survivable accidents
• CS ACNS.E.LAD.340 Activation and transmission over water and over land
• AMC1 ACNS.C.PBN.255 Magnetic variation
• CS ACNS.E.LAD.240 Automatic activation
• Operation, activation and deactivation
• Appendices
• RNP system
• Appendix D - Differences between CS ACNS.D.ELS and JAA TGL 13 Rev1
• Section 2 – Reduced Vertical Separation Minimum (RVSM)
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• CS ACNS.E.LAD.320 Flight dynamics and locating the aircraft
• CS ACNS.C.PBN.801 Applicability
• AMC1 ACNS.E.TAWS.015 FLTA function requirements
• SUPPLEMENTARY PERFORMANCE CRITERIA
• GM1 ACNS.C.PBN.260 RNAV holding
• AMC1 ACNS.C.PBN.2135 Navigation accuracy alerting
• CS ACNS.C.PBN.215 Position estimation
• Preamble
• CS ACNS.E.TAWS.045 Continuity
• AMC 1 ACNS.C.PBN.505 Vertical approach path
• CS ACNS.A.GEN.005 Definitions
• GM1 ACNS.C.PBN.2115 Use of navigation database
• CS ACNS.C.PBN.2115 Use of navigation database
• APPLICABILITY
• CS ACNS.C.PBN.645 RNP AR departures - Take off performance Data
• AMC1 ACNS.C.PBN.640 RNP AR departures
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• CS ACNS.C.PBN.220 Navigation source selection and reversion
• AMC1 ACNS.D.AC.020 Altitude source
• CS ACNS.D.EHS.015 Data transmission
• CS ACNS.D.ELS.040 Integrity
• CS ACNS.B.DLS.B1.001 Applicability
• GM1 ACNS.E.LAD.010 Definitions
• Section 1 – Voice Channel Spacing (VCS)
• CS ACNS.D.ELS.010 Transponder characteristics
• FUNCTIONAL CRITERIA
• AMC1 ACNS.D.ADSB.030 ADS-B Transmit unit installation
• APPLICABILITY
• AMC1 ACNS.D.AC.010 Transponder characteristics
• ADS-B Transmit Unit
• System Performance Requirements
• Robustness
• AMC1 ACNS.C.PBN.670 Vertical accuracy
• CS ACNS.B.DLS.B1.100 Network Layer Requirements
• AMC1 ACNS.E.TAWS.060 Positioning information
• GM1 ACNS.B.DLS.B1.020 Data link services
• CS ACNS.E.LAD.001 Applicability and scope
• CS ACNS.D.ELS.050 Dual/multiple transponder installation
• CS ACNS.D.AC.020 Altitude source
• AMC2 ACNS.C.PBN.280 Deviation display
• Appendices
• AMC1 ACNS.C.PBN.310 Final approach intercept
• CS ACNS.E.TAWS.030 Terrain information display
• CS ACNS.C.PBN.260 RNAV holding
• Display of navigation data
• Transmission
• CS ACNS.C.PBN.555 Vertical accuracy when using barometric VNAV
• CS ACNS.E.RVSM.005 RVSM system
• CS ACNS.B.DLS.B1.035 DLS system continuity
• CS ACNS.C.PBN.330 Non-numeric lateral deviation display scaling for approach
• AMC1 ACNS.C.PBN.205 RNP system approval
• CS ACNS.C.PBN.805 RF functional requirements
• Horizontal Position and Velocity Data Sources
• System Performance Requirements
• AMC3 ACNS.E.LAD.020 System approval
• CS ACNS.C.PBN.401 Applicability
• APPENDIX A - ALTIMETRY SYSTEM ERROR COMPONENTS
• Appendix B - Example of an acceptable TAWS installation
• AMC1 ACNS.D.EHS.001 Applicability
• Appendix A -- Guidance on classification of Failure Conditions.
• RNP system
• CS ACNS.C.PBN.290 Display of ground speed
• GM2 ACNS.C.PBN.101 Applicability
• AMC1 ACNS.B.DLS.B1.085 ATC Communications Management (ACM) Service
• CS ACNS.E.LAD.310 Environmental and crash conditions encountered during accidents
• CS ACNS.B.DLS.B1.115 Presentation layer requirements
• AMC1 ACNS.E.LAD.310 Environmental and crash conditions encountered during accidents
• RNP system
• AMC1 ACNS.D.EHS.015 Data transmission
• CS ACNS.C.PBN.501 Applicability
• AMC1 ACNS.C.PBN.680 RNP system design -- RNP AR continuity
• GM1 ACNS.B.DLS.B1.105 Transport Layer Requirements
• AMC1 ACNS.B.VCS.030 Continuity
• AMC1 ACNS.E.LAD.650 Risk for third parties
• GM1 ACNS.E.LAD.360 Shared airborne resources and transmission means
• AMC2 ACNS.E.LAD.210 Normal operation
• AMC1 ACNS.C.PBN.2125 Extraction and display of navigation data
• AMC1 ACNS.C.PBN.220 Navigation source selection and reversion
• Horizontal Position and Velocity Data Refresh Rate and Latency
• Disclaimer
• GM1 ACNS.C.PBN.601 Applicability
• AMC1 ACNS.C.PBN.610 Source of horizontal position
• GM1 ACNS.C.PBN.320 Approach mode indication
• CS ACNS.C.PBN.515 Pressure settings
• AMC1 ACNS.E.LAD.130 Transmission of the deactivation signals
• CS ACNS.D.ELS.045 Continuity
• CS ACNS.B.VCS.030 Continuity
• CS ACNS.C.PBN.285 Display of active waypoint
• CS ACNS.D.ADSB.060 On-the-ground status determination
• AMC1 ACNS.E.LAD.020 System approval
• CS ACNS.C.PBN.305 RNP system approval
• Section 3 – Location of an Aircraft in Distress
• AMC1 ACNS.B.DLS.B1.120 Application Layer Requirements
• GM1 ACNS.C.PBN.301 Applicability
• AMC1 ACNS.B.VCS.010 Voice Communication Systems
• CS ACNS.E.LAD.410 Position accuracy for non-survivable accidents
• AMC1 ACNS.E.LAD.340 Activation and transmission over water and over land
• Data link services requirements
• CS ACNS.E.LAD.230 Continued operation after losing normal electrical power
• Table of contents
• GM1 ACNS.C.PBN.515 Pressure settings
• AMC1 ACNS.D.ELS.020 On-the-ground status determination
• CS ACNS.D.ELS.055 ICAO 24-bit Aircraft address
• AMC1 ACNS.C.PBN.285 Display of active waypoint
• GM1 ACNS.B.DLS.B1.070 Uplink Messages
• GM1 ACNS.D.ADSB.001 Applicability
• AMC1 ACNS.D.ADSB.025(a) Provision of data -- Approved sources
• AMC1 ACNS.D.ADSB.085 Geometric Altitude
• Appendix B - Background information on data link systems
• CS ACNS.E.LAD.010 Definitions
• CS ACNS.E.TAWS.070 Failure mode
• AMC1 ACNS.C.PBN.555 Vertical accuracy when using barometric VNAV
• CS ACNS.E.LAD.250 Manual activation
• CS ACNS.E.TAWS.025 Class A TAWS inhibition
• GM1 ACNS.E.LAD.260 Automatic deactivation
• AMC2 ACNS.B.DLS.B1.025 Protection mechanism
• CS ACNS.D.EHS.001 Applicability
• AMC1 ACNS.C.PBN.2120 Data quality requirements (DQRs)
• GM2 ACNS.B.DLS.B1.025 Protection mechanism
• GM1 ACNS.C.PBN.245 Path definition and leg transition
• AMC1 ACNS.D.ELS.025 Altitude source
• AMC3 ACNS.B.DLS.B1.025 Protection mechanism
• CS ACNS.E.LAD.260 Automatic deactivation
• Subsection 2 – Generic specifications for performance-based lateral navigation
• Section 2 – Mode S elementary surveillance
• System Functional Requirements
• CS ACNS.D.ELS.020 On-the-ground status determination
• SYSTEM QUALIFICATION CRITERIA
• CS ACNS.C.PBN.235 Automatic leg sequencing
• AMC1 ACNS.E.TAWS.045 Continuity
• CS ACNS.B.DLS.B1.105 Transport Layer Protocol Requirements
• CS ACNS.C.PBN.535 Resolution and full-scale deflection of the vertical deviation display
• CS ACNS.B.DLS.B1.050 DLIC Uplink Messages
• AMC1 ACNS.C.PBN.635 Navigation accuracy for RNP AR operations
• GM1 ACNS.C.PBN.610 Source of horizontal position
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• AMC1 ACNS.C.PBN.660 Use of a navigation database
• CS ACNS.D.ADSB.070 Horizontal Position and Velocity Data Sources
• Installation requirements
• CS ACNS.C.PBN.635 Navigation accuracy for RNP AR operations
• CS ACNS.C.PBN.625 Go-around and missed approach
• GM1 ACNS.C.PBN.805 RF functional requirements
• Time
• CS ACNS.A.GEN.001 Applicability
• AMC1 ACNS.D.ADSB.025(c) Provision of data - Data quality indication and associated data
• General
• System functional requirements
• SECTION 1 – PERFORMANCE-BASED NAVIGATION (PBN)
• GM1 ACNS.E.LAD.210 Normal operation
• AMC2 ACNS.E.LAD.020 System approval
• CS ACNS.B.DLS.B1.020 Data Link Services
• CS ACNS.B.VCS.020 Performance requirements
• CS ACNS.D.ELS.025 Altitude source
• GM1 ACNS.E.LAD.110 Transmission of the activation signals
• CS ACNS.D.ELS.001 Applicability
• CS ACNS.C.PBN.2110 Display of navigation aid frequencies and/or identifiers
• GM1 ACNS.B.DLS.B1.001 Applicability
• Appendix C -- Installation and testing guidance
• GM1 ACNS.C.PBN.501 Applicability
• CS ACNS.C.PBN.525 Temperature compensation
• CS ACNS.E.TAWS.040 Integrity
• CS ACNS.D.ELS.065 Antenna diversity
• CS ACNS.C.PBN.615 Autopilot/Flight director
• CS ACNS.D.ADSB.090 Flight deck interface
• CS ACNS.B.VCS.001 Applicability
• AMC1 ACNS.B.DLS.B1.050 DLIC Uplink Messages
• GM1 ACNS.E.LAD.250 Manual activation
• CS ACNS.C.PBN.265 User-defined routes and fixes
• AMC1 ACNS.C.PBN.525 Temperature compensation
• CS ACNS.D.ELS.060 Antenna installation
• AMC1 ACNS.B.DLS.B1.035 DLS system continuity
• GM2 ACNS.C.PBN.205 RNP system approval
• CS ACNS.E.LAD.160 Deactivation signals -- essential information
• AMC1 ACNS.A.GEN.010 Instructions for Continued Airworthiness
• CS ACNS.E.LAD.020 System approval
• CS ACNS.B.DLS.B1.030 Integrity
• Navigation database
• Section 2 – Data Link Services (DLS)
• AMC1 ACNS.E.LAD.170 Transmission of a homing signal
• AMC1 ACNS.C.PBN.280 Deviation display
• CS ACNS.E.LAD.130 Transmission of the deactivation signals
• APPLICABILITY
• CS ACNS.B.DLS.B1.095 ATC microphone check (AMC) service
• AMC1 ACNS.E.LAD.410 Position accuracy for non-survivable accidents
• CS ACNS.C.PBN.230 Flight plan management
• CS ACNS.C.PBN.2120 Data quality requirements (DQRs)
• CS ACNS.D.ADSB.045 Antenna installation
• CS ACNS.C.PBN.2125 Extraction and display of navigation data
• Appendix C - Background information on Mode S EHS
• CS ACNS.C.PBN.2135 Navigation accuracy alerting
• CS ACNS.D.AC.015 Data transmission
• CS ACNS.E.LAD.280 Indications to the flight crew and selfmonitoring
• AMC1 ACNS.B.DLS.B1.115 Presentation Layer Requirement
• CS ACNS.C.PBN.701 Applicability
• CS ACNS.A.GEN.020 Deviation from equipment standards
• Other Data Sources
• CS ACNS.C.PBN.250 'Direct-to' function
• AMC1 ACNS.D.AC.045 Antenna Installation
• CS ACNS.B.DLS.B1.125 Database
• CS ACNS.B.DLS.B1.025 Protection mechanism
• AMC1 ACNS.E.LAD.290 Means to analyse automatic activation
• General
• GM2 ACNS.E.LAD.240 Automatic activation
• AMC1 ACNS.D.EHS.010 Transponder characteristics
• AMC3 ACNS.C.PBN.205 RNP system approval
• AMC1 ACNS.C.PBN.1005 Parallel offset capabilities
• AMC1 ACNS.C.PBN.2115 Use of navigation database
• Appendix D -- RF leg demonstration templates
• AMC3 ACNS.E.LAD.310 Environmental and crash conditions encountered during accidents
• CS ACNS.C.PBN.655 Lateral deviation display
• GM1 ACNS.D.AC.001 Applicability
• CS ACNS.E.LAD.420 Position accuracy for survivable accidents
• CS ACNS.C.PBN.901 Applicability
• GM1 ACNS.C.PBN.535 Resolution and full-scale deflection of the vertical deviation display
• GM1 ACNS.C.PBN.605 System performance demonstration
• CS ACNS.C.PBN.205 RNP system approval
• Subpart C — Navigation (NAV)
• Appendix H - Guidance on 1090-MHz extended squitter ADS-B Out
• CS ACNS.C.PBN.210 Position source
• General
• AMC1 ACNS.B.DLS.B1.090 ATC Clearances and Information (ACL) Service
• CS ACNS.D.ADSB.080 Data Sources as defined by Mode S Elementary and Enhanced Surveillance
• Note from the editor
• GM1 ACNS.B.VCS.030 Continuity
• CS ACNS.C.PBN.715 RNP scalability
• GM1 ACNS.E.LAD.170 Transmission of a homing signal
• Section 4 – 1090 MHz Extended Squitter ADS-B
• CS ACNS.C.PBN.710 Parallel offset
• CS ACNS.C.PBN.405 Vertical path
• AMC1 ACNS.E.RVSM.010 Required functions
• GM3 ACNS.B.DLS.B1.025 Protection mechanism
• Appendix B - Background information on Mode S ELS
• System functional requirements
• AMC1 ACNS.C.PBN.535 Resolution and full-scale deflection of the vertical deviation display
• CS ACNS.C.PBN.640 RNP AR departures - Functional Requirements
• AMC1 ACNS.C.PBN.270 Navigation accuracy
• GM1 ACNS.C.PBN.625 Go-around and missed approach
• SUPPLEMENTARY PERFORMANCE CRITERIA
• CS ACNS.C.PBN.2140 Lateral navigation accuracy
• AMC1 ACNS.C.PBN.290 Display of ground speed
• SUPPLEMENTARY SYSTEM QUALIFICATION
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• AMC2 ACNS.C.PBN.530 Vertical deviation display
• GM3 ACNS.B.DLS.B1.075 Optional ACL Downlink Messages
• Subsection 4 – Supplementary specifications for vertical navigation
• CS ACNS.D.AC.010 Transponder characteristics
• AMC 1 ACNS.C.PBN.565 Transitions
• AMC1 ACNS.C.PBN.2150 RNP system design -- continuity
• Appendix A - Background information on voice communication systems
• RNP system
• GM3 ACNS.C.PBN.205 RNP system approval
• APPLICABILITY
• RNP system
• CS ACNS.D.ADSB.055 Simultaneous operation of ADS-B transmit units
• CS ACNS.C.PBN.705 Radius to Fix
• AMC1 ACNS.D.ADSB.060 On-the-ground status Determination
• AMC1 ACNS.D.ADSB.090(a) Flight deck interface
• CS ACNS.C.PBN.245 Path definition and leg transition
• AMC1 ACNS.D.ADSB.040 Antenna Diversity
• System Performance Requirements
• CS ACNS.B.DLS.B1.080 Data link initiation capability (DLIC) service
• GM1 ACNS.E.TAWS.020 PDA function requirements
• Display of navigation data
• CS ACNS.E.TAWS.020 PDA function requirements
• AMC1 ACNS.C.PBN.101 Applicability
• CS ACNS.C.PBN.255 Magnetic variation
• PERFORMANCE CRITERIA
• CS ACNS.D.ADSB.020 ADS-B Out Data Parameters
• Display of navigation data
• CS ACNS.C.PBN.550 Glide path alerting
• AMC1 ACNS.E.TAWS.080 Pop-up mode
• Lateral performance
• RNP system
• Installation Requirements
• CS ACNS.C.PBN.910 Display of the computed path
• CS ACNS.E.LAD.650 Risk for third parties
• Installation requirements
• System performance requirements
• Section 1 – Mode A/C only surveillance
• CS ACNS.D.AC.001 Applicability
• CS ACNS.C.PBN.270 Navigation accuracy
• CS ACNS.C.PBN.610 Source of horizontal position
• CS ACNS.C.PBN.410 Altitude constraints
• Monitoring and alerting
• CS ACNS.D.ADSB.100 Integrity
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• APPLICABILITY
• CS ACNS.B.DLS.B1.015 Dual Data Link Capabilities (Dual stack)
• CS ACNS.C.PBN.320 Approach mode indication
• GM1 ACNS.C.PBN.101 Applicability
• GM2 ACNS.E.LAD.230 Continued operation after losing normal electrical power
• AMC1 ACNS.D.ADSB.110 Horizontal Position and Velocity Data Refresh
• GM1 ACNS.E.LAD.150 Activation signals -- supplementary
• AMC1 ACNS.D.AC.040 Dual/multiple transponder installation
• AMC1 ACNS.E.TAWS.035 Aural and visual alerts
• CS ACNS.C.PBN.530 Vertical deviation display
• AMC1 ACNS.D.ELS.030 Flight deck interface
• CS ACNS.C.PBN.520 Glide path intercept
• AMC1 ACNS.B.DLS.B1.010 Flight deck interface
• AMC1 ACNS.C.PBN.230 Flight plan management
• AMC1 ACNS.E.LAD.250 Manual activation
• AMC1 ACNS.C.PBN.815 Autopilot/Flight director
• AMC1 ACNS.C.PBN.2145 RNP system design -- integrity
• AMC1 ACNS.D.AC.025 Flight deck interface
• System Functional Requirements
• System Performance Requirements
• GM1 ACNS.C.PBN.205 RNP system approval
• AMC1 ACNS.E.TAWS.025 Class A TAWS inhibition
• CS ACNS.C.PBN.540 Barometric altitude
• AMC1 ACNS.C.PBN.605 System performance demonstration
• AMC2 ACNS.C.PBN.670 Vertical accuracy
• CS ACNS.B.VCS.010 Voice Communication System
• System performance requirements
• Installation requirements
• CS ACNS.C.PBN.601 Applicability
• AMC1 ACNS.B.DLS.B1.110 Session Layer Requirement
• AMC1 ACNS.D.ELS.050 Dual/multiple transponder installation
• AMC1 ACNS.A.GEN.015(a) Aircraft documentation
• AMC1 ACNS.E.LAD.110 Transmission of the activation signals
• Subsection 1 – Applicability – General
• AMC1 ACNS.C.PBN.2105 Display of speed constraints
• CS ACNS.E.TAWS.075 Prioritisation scheme
• AMC1 ACNS.B.DLS.B1.055 DLIC Downlink Messages
• AMC2 ACNS.E.LAD.110 Transmission of the activation signals
• CS ACNS.C.PBN.670 Vertical accuracy
• AMC1 ACNS.C.PBN.410 Altitude constraints
• AMC1 ACNS.E.LAD.280 Indications to the flight crew and selfmonitoring
• GM1 ACNS.E.LAD.350 Means and procedures to prevent undesirable activation
• CS ACNS.E.RVSM.030 RVSM system performance
• AMC1 ACNS.C.PBN.240 Route/procedure extraction and loading
• CS ACNS.D.ADSB.040 Antenna diversity
• CS ACNS.D.ELS.030 Flight deck interface
• CS ACNS.C.PBN.101 Applicability
• System Functional Requirements
• Display of navigation data
• Section 3 – Mode S Enhanced Surveillance
• AMC1 ACNS.B.DLS.B1.105 Transport Layer Requirements
• Appendix F - Example of Flight Manual Supplement for ELS/EHS
• Appendix J - Comparison between EASA CS ACNS.D.ADSB and FAA AC 20-165A Requirements
• AMC1 ACNS.B.DLS.B1.100 Network Layer Requirements
• AMC1 ACNS.E.TAWS.055 Terrain and airport information
• CS ACNS.E.RVSM.035 Altimetry system accuracy
• CS ACNS.D.ADSB.001 Applicability
• CS ACNS.B.DLS.B1.085 ATC communications management (ACM) service
• Interoperability Requirements
• CS ACNS.D.AC.040 Dual/multiple transponder installation
• AMC2 ACNS.E.TAWS.010 Required functions
• AMC1 ACNS.C.PBN.325 Lateral deviation display
• AMC3 ACNS.C.PBN.280 Deviation display
• CS ACNS.D.ADSB.105 Continuity
• AMC1 ACNS.E.RVSM.035 Altimetry system accuracy
• CS ACNS.E.LAD.270 Manual deactivation
• CS ACNS.E.TAWS.035 Aural and visual alerts
• AMC1 ACNS.C.PBN.530 Vertical deviation display
• AMC2 ACNS.E.LAD.310 Environmental and crash conditions encountered during accidents
• CS ACNS.B.DLS.B1.040 Universal Time Coordinated (UTC)
• CS ACNS.E.LAD.170 Transmission of a homing signal
• CS ACNS.C.PBN.675 RNP system design - RNP AR integrity
• CS ACNS.D.EHS.010 Transponder characteristics
• AMC1 ACNS.C.PBN.905 Fixed radius transition (FRT) requirements
• Accuracy
• AMC1 ACNS.D.ELS.065 Antenna Diversity
• AMC1 ACNS.C.PBN.570 Advisory VNAV
• CS ACNS.E.TAWS.050 GPWS
• AMC1 ACNS.E.RVSM.001 Applicability
• GM1 ACNS.B.DLS.B1.080 Data Link Initiation Capability (DLIC) Service
• CS ACNS.D.ADSB.110 Horizontal position and velocity data refresh rate
• GM1 ACNS.C.PBN.265 User-defined routes and fixes
• AMC1 ACNS.D.AC.015 Data transmission
• CS ACNS.E.LAD.360 Shared airborne resources and transmission means
• System functional requirements
• AMC1 ACNS.D.ADSB.010 ADS-B Out system approval
• AMC1 ACNS.C.PBN.2130 Alerting associated with degradation of navigation
• RNP system
• AMC1 ACNS.C.PBN.550 Glide path alerting
• AMC1 ACNS.C.PBN.805 RF functional requirements
• Section 1 – Terrain Awareness and Warning System (TAWS)
• AMC3 ACNS.E.LAD.110 Transmission of the activation signals
• CS ACNS.C.PBN.650 Display of aircraft track
• AMC2 ACNS.E.LAD.240 Automatic activation
• RNP system
• Subsection 3 – Supplementary specifications for lateral navigation in final approach
• AMC1 ACNS.C.PBN.715 RNP scalability
• CS ACNS.D.ADSB.050 Transmit power
• CS ACNS.C.PBN.420 Pressure settings
• General
• AMC1 ACNS.C.PBN.215 Position estimation
• CS ACNS.E.RVSM.010 Required functions
• AMC1 ACNS.E.LAD.120 Repeated transmission of the activation signals
• CS ACNS.E.TAWS.005 TAWS Equipment Approval
• AMC1 ACNS.D.ADSB.105 Continuity
• CS ACNS.C.PBN.660 Use of a navigation database
• Appendices
• AMC1 ACNS.C.PBN.225 Reasonableness check of distance-measuring equipment (DME)
• CS ACNS.C.PBN.2105 Display of speed constraints
• AMC1 ACNS.B.DLS.B1.025 Protection mechanism
• CS ACNS.C.PBN.560 Vertical accuracy when using SBAS/GNSS geometric altitude sources
• CS ACNS.D.ADSB.030 ADS-B Transmit Unit Approval
• Appendix A - TAWS installations testing guidance material
• CS ACNS.C.PBN.905 Fixed radius transition (FRT) requirements
• AMC1 ACNS.C.PBN.675 RNP system design -- RNP AR integrity
• GM1 ACNS.C.PBN.215 Position estimation
• GM1 ACNS.E.LAD.280 Indications to the flight crew and selfmonitoring
• CS ACNS.C.PBN.605 System performance demonstration
• Interoperability
• System Functional Requirements
• CS ACNS.B.DLS.B1.120 Application Layer Requirements
• CS ACNS.B.DLS.B1.060 DLIC initiation when in 'CPDLC inhibited' state (uplink)
• CS ACNS.D.EHS.020 Integrity
• AMC1 ACNS.D.ELS.060 Antenna Installation
• CS ACNS.B.DLS.B1.110 Session Layer Requirement
• GM1 ACNS.A.GEN.001 Applicability
• Subsection 6 – Supplementary specifications for RNP authorisation required (RNP AR)
• AMC1 ACNS.B.VCS.040 Flight Deck Interface
• AMC1 ACNS.D.ADSB.080 Data sources as defined by Mode S elementary and enhanced surveillance
• GM1 ACNS.C.PBN.640 RNP AR departures
• CS ACNS.D.AC.035 Continuity
• AMC1 ACNS.E.LAD.620 Integrity
• Subpart D — Surveillance (SUR)
• GM1 ACNS.C.PBN.620 Reversion
• AMC1 ACNS.E.RVSM.030 RVSM system performance requirement
• GM1 ACNS.C.PBN.310 Final approach intercept
• CS ACNS.E.LAD.110 Transmission of the activation signals
• CS ACNS.E.TAWS.060 Positioning information
• CS ACNS.C.PBN.1010 Indication of parallel offset status
• AMC1 ACNS.E.LAD.240 Automatic activation
• AMC1 ACNS.E.LAD.520 Frequency spectrum
• CS ACNS.C.PBN.2130 Alerting associated with degradation of navigation
• CS ACNS.E.TAWS.010 Required Functions and Interfaces
• AMC1 ACNS.D.ELS.001 Applicability
• CS ACNS.C.PBN.301 Applicability
• Subsection 9 – Supplementary specifications supporting fixed radius transition (FRT)
• AMC1 ACNS.B.DLS.B1.040 Universal Time Coordinated (UTC)
• AMC1 ACNS.D.ADSB.055 Simultaneous operation of ADS-B transmit units
• CS ACNS.C.PBN.325 Lateral deviation display
• GM1 ACNS.B.DLS.B1.100 Network Layer Requirements
• CS ACNS.E.RVSM.001 Applicability
• CS ACNS.D.ADSB.010 ADS-B Out system approval
• Display of navigation data
• APPLICABILITY
• CS ACNS.C.PBN.565 Transitions
• CS ACNS.A.GEN.010 Instructions for continued airworthiness
• CS ACNS.D.AC.025 Flight deck interface
• CS ACNS.E.LAD.210 Normal operation
• CS ACNS.D.ADSB.120 Horizontal Position Uncompensated Latency
• CS ACNS.E.LAD.290 Means to analyse automatic activation
• CS ACNS.C.PBN.680 RNP system design - RNP AR continuity
• CS ACNS.C.PBN.2150 RNP system design -- continuity
• CS ACNS.D.ELS.015 Data transmission
• CS ACNS.B.DLS.B1.090 ACL service safety requirements
• CS ACNS.E.LAD.520 Frequency spectrum
• CS ACNS.C.PBN.201 Applicability
• CS ACNS.C.PBN.505 Vertical approach path
• AMC1 ACNS.E.TAWS.010 Required functions
• CPDLC Messages
• AMC1 ACNS.E.TAWS.075 Prioritisation schemes
• AMC1 ACNS.C.PBN.245 Path definition and leg transition
• AMC 1 ACNS.C.PBN.305 RNP system approval
• Display of navigation data
• AMC1 ACNS.C.PBN.655 Lateral deviation display
• CS ACNS.C.PBN.545 Active approach mode display
• GM1 ACNS.C.PBN.570 Advisory VNAV
• AMC1 ACNS.C.PBN.580 RNP system design -- continuity
• GM1 ACNS.B.DLS.B1.025 Protection mechanism
• CS ACNS.C.PBN.815 Autopilot/Flight director
• CS ACNS.C.PBN.280 Deviation display
• Appendix B -- INS/IRU standard performance and functionality
• RNP system
• CS ACNS.E.LAD.350 Means and procedures to prevent undesirable activation
• AMC1 ACNS.E.TAWS.040 Integrity
• Subpart A — General
• GM1 ACNS.C.PBN.420 Pressure settings
• Flight Deck Control and Indication Capabilities
• CS ACNS.D.AC.030 Integrity
• CS ACNS.C.PBN.2145 RNP system design -- integrity
• System performance
• CS ACNS.E.LAD.620 Integrity
• CS ACNS.D.AC.045 Antenna installation
• CS ACNS.B.VCS.025 Integrity
• System performance requirements
• CS ACNS.E.TAWS.015 FLTA function requirements
• AMC1 ACNS.C.PBN.630 Radius to fix (RF) leg transition
• AMC1 ACNS.C.PBN.265 User-defined routes and fixes
• CS ACNS.C.PBN.335 Display of distance to threshold
• SUPPLEMENTARY FUNCTIONAL CRITERIA
• Appendix A -- Example flight trajectory
• CS ACNS.A.GEN.015 Aircraft documentation
• Vertical performance