ED Decision 2016/013/R
1 Applicability
This ETSO provides the requirements which Flight Deck (Sedentary) Crew Member Protective Breathing Equipment that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO, Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in the SAE AS8031A, Personal Protective Devices for Toxic and Irritating Atmospheres Air Transport Flight Deck (Sedentary) Crew members, dated 3/1/1999 as amended by Appendix 1 to this ETSO.
3.1.2 Environmental Standard
To be tested in accordance with the procedures in SAE AS8026A, Crewmember Demand Oxygen Mask for Transport Category Aircraft, dated July 1996, paragraph 4.5.
3.1.3 Computer Software
None.
3.1.4 Electronic Hardware Qualification
None.
3.2 Specific
None.
3.2.1 Failure Condition Classification
See CS-ETSO, Subpart A, paragraph 2.4.
4 Marking
4.1 General
Marking as detailed in CS-ETSO, Subpart A, paragraph 1.2.
4.2 Specific
In addition to 4.1, the mask assembly shall be marked with the following:
(1) Size (if more than one size is manufactured),
(2) Type (as specified in ETSO-C89a, paragraph 3), and
(3) ‘Beards will not seal’, if applicable.
5 Availability of Referenced Document
See CS-ETSO, Subpart A, paragraph 3.
[Amdt ETSO/11]
This ETSO requires flight deck (sedentary) crew member protective breathing equipment to meet SAE AS8031A performance standards and SAE AS8026A environmental testing, with specific mask markings including size, type, and
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...