ED Decision 2022/018/R
1 Applicability
This ETSO provides the requirements that anticollision light systems that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
The applicable procedures are detailed in CS-ETSO, Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
The applicable standard is that provided in Society of Automotive Engineers, Inc., (SAE) Aerospace Standard AS8017D ‘Minimum Performance Standard for Anticollision Light Systems’, dated August 2017, as modified by Appendix 1 to this ETSO.
3.1.2 Environmental Standard
See CS-ETSO, Subpart A, paragraph 2.1.
3.1.3 Software
See CS-ETSO, Subpart A, paragraph 2.2.
3.1.4 Airborne Electronic Hardware
See CS-ETSO, Subpart A, paragraph 2.3.
3.2 Specific
3.2.1 Failure Condition Classification
See CS-ETSO, Subpart A, paragraph 2.4.
3.2.2 Others
Note: AS8017D does not reflect the impact of updates to Certification Specifications published after 15 August 2017, such as CS‑23 Amendment 5.
4 Marking
4.1 General
See CS-ETSO, Subpart A, paragraph 1.2.
4.2 Specific
The following information shall be legibly and permanently marked on the major equipment components:
(a) Class I, II, III or IV (refer to SAE AS8017D and Appendix 1 to this ETSO).
(b) Nominal power input rating.
5 Availability of Referenced Document
See CS-ETSO, Subpart A, paragraph 3.
[Amdt ETSO/13]
ETSO-C96c requires anticollision light systems to meet SAE AS8017D as modified by Appendix 1, with marking of class and power rating on major components.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...