ETSO-C96c

• ED Decision 2022/018/R found in: CS-ETSO Amdt 17 - European Technical Standard Orders (Oct 2026)

#### ETSO-C96c *ED Decision 2022/018/R* ##### **Anticollision Light Systems** **1 Applicability** This ETSO provides the requirements that anticollision light systems that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking. **2 Procedures** 2.1 General The applicable procedures are detailed in CS-ETSO, [Subpart A](#_DxCrossRefBm920220672). 2.2 Specific None. **3 Technical Conditions** 3.1 Basic 3.1.1 Minimum Performance Standard The applicable standard is that provided in Society of Automotive Engineers, Inc., (SAE) Aerospace Standard AS8017D ‘Minimum Performance Standard for Anticollision Light Systems’, dated August 2017, as modified by Appendix 1 to this ETSO. 3.1.2 Environmental Standard See CS-ETSO, Subpart A, paragraph 2.1. 3.1.3 Software See CS-ETSO, Subpart A, paragraph 2.2. 3.1.4 Airborne Electronic Hardware See CS-ETSO, Subpart A, paragraph 2.3. 3.2 Specific 3.2.1 Failure Condition Classification See CS-ETSO, Subpart A, paragraph 2.4. 3.2.2 Others Note: AS8017D does not reflect the impact of updates to Certification Specifications published after 15 August 2017, such as CS‑23 Amendment 5. **4 Marking** 4.1 General See CS-ETSO, Subpart A, paragraph 1.2. 4.2 Specific The following information shall be legibly and permanently marked on the major equipment components: (a) Class I, II, III or IV (refer to SAE AS8017D and Appendix 1 to this ETSO). (b) Nominal power input rating. **5 Availability of Referenced Document** See CS-ETSO, Subpart A, paragraph 3. [Amdt ETSO/13] [Amdt ETSO/17]