ED Decision 2020/011/R
1 Applicability
This ETSO provides the requirements which pressure altimeter systems that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
The applicable procedures are detailed in CS-ETSO, Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
The applicable standards are those provided in SAE International’s Aerospace Standard AS8009C, Pressure Altimeter Systems, dated 24 May 2016, as amended by Appendix 1 to this ETSO.
3.1.2 Environmental Standard
See CS-ETSO, Subpart A, paragraph 2.1.
3.1.3 Software
See CS-ETSO, Subpart A, paragraph 2.2.
3.1.4 Airborne Electronic Hardware
See CS-ETSO, Subpart A, paragraph 2.3.
3.2 Specific
The declaration of design and performance (DDP) and the installation manual shall state the maximum calibrated altitude.
3.2.1 Failure Condition Classification
See CS-ETSO, Subpart A, paragraph 2.4.
4 Marking
4.1 General
See CS-ETSO, Subpart A, Paragraph 1.2.
4.2 Specific
None.
5 Availability of Referenced Documents
See CS-ETSO, Subpart A, paragraph 3.
[Amdt ETSO/Initial issue]
[Amdt ETSO/16]
Loading collections...