ED Decision 2010/010/R
1 Applicability
1.1 General
This ETSO gives the requirements for new models of carbon monoxide detector instruments, which are manufactured on or after the date of this ETSO, must meet in order to be identified with the applicable ETSO marking.
1.2 Specific
This ETSO refers to two basic types of detector instruments:
— TYPE A instruments are completely self-contained and carry their own power source and warning system.
— TYPE B instruments are powered by the aircraft power supplies including the alarm system.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
See Appendix 1
3.1.2 Environmental Standard
See CS-ETSO Subpart A paragraph 2.1 and Appendix 2
3.1.3 Computer Software
See CS-ETSO Subpart A paragraph 2.2
3.1.4 Electronic Hardware Qualification
See CS-ETSO Subpart A paragraph 2.3
3.2 Specific
3.2.1 Failure Condition Classification
See CS-ETSO Subpart A paragraph 2.4
Failure of the function defined in paragraph 3.1.1 of this ETSO has been determined to be a minor failure condition.
4. Marking
4.1 General
Marking is detailed in CS-ETSO Subpart A paragraph 1.2
4.2 Specific
The component must be permanently and legibly marked with the equipment class as defined in paragraph 1.2 of this ETSO.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3
[Amdt ETSO/6]
ETSO-2C48a specifies requirements for new carbon monoxide detector instruments, including Type A and Type B, with a minor failure condition classification and mandatory equipment class marking.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...