ED Decision 2020/011/R
1 Applicability
This ETSO provides the requirements which portable water-solution type hand fire extinguishers that are designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
The applicable procedures are detailed in CS-ETSO, Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
The applicable standards are those provided in SAE International’s Aerospace Standard AS245B, Water Solution Type Hand Fire Extinguisher, dated 1 November 1948, revised in April 2000, as amended by Appendix 1 to this ETSO.
3.1.2 Environmental Standard
See CS-ETSO, Subpart A, paragraph 2.1
3.1.3 Software
None.
3.1.4 Airborne Electronic Hardware
See CS-ETSO, Subpart A, paragraph 2.3.
3.2 Specific
3.2.1 Failure Condition Classification
See CS-ETSO, Subpart A, paragraph 2.4.
4 Marking
4.1 General
See CS-ETSO, Subpart A, paragraph 1.2.
Instead of the optional serial number, the date of manufacture has to be marked.
4.2 Specific
In addition to the requirements of paragraph 4.1, the marking requirements of SAE International’s Aerospace Standard AS245B, paragraph 3.2 are applicable.
5 Availability of Referenced Document
See CS-ETSO, Subpart A, paragraph 3
[Amdt ETSO/12]
[Amdt ETSO/16]
ETSO-2C19c sets requirements for portable water-solution type hand fire extinguishers, including marking the date of manufacture and compliance with SAE AS245B as amended.
* Summary by Aviation.Bot - Always consult the original document for the most accurate information.
Loading collections...