ED Decision 2009/005/R
The fuel cell data plate should include the following information:
— the manufacturers name or mark;
— the type design approval number (if applicable);
— the manufacturers serial number;
— the UN number and the proper name of the gas or mixture of gases (e.g. UN1978 Propane); and
— the maximum filling of the receptacle with the fittings and accessories as fitted at the time of filling.
Note: The data plate should include, where applicable, information to allow safe filling by commercial facilities (e.g. filling by weight). Where a fuel cell has been designed to a standard which is not compatible with comparable industrial standards, the data plate should include the statement “For use in Hot Air Balloons only”.
Loading collections...