AMC 31HB.45(d)(5) Fuel cells

• ED Decision 2009/005/R found in: CS-31HB Amdt 1 - Hot Air Balloons (Dec 2011)

AMC 31HB.45(d)(5) Fuel cells ED Decision 2009/005/R The fuel cell data plate should include the following information: — the manufacturers name or mark; — the type design approval number (if applicable); — the manufacturers serial number; — the UN number and the proper name of the gas or mixture of gases (e.g. UN1978 Propane); and — the maximum filling of the receptacle with the fittings and accessories as fitted at the time of filling. Note: The data plate should include, where applicable, information to allow safe filling by commercial facilities (e.g. filling by weight). Where a fuel cell has been designed to a standard which is not compatible with comparable industrial standards, the data plate should include the statement “For use in Hot Air Balloons only”.