AMC to
Appendix S, S25.20(a)(1) Flammability of Bed Mattresses
ED Decision 2017/015/R
Mattresses of beds that are convertible to/from seats, regardless of
their location in the aeroplane, and irrespective of whether or not the seat
configuration is approved for occupancy during taxiing, take-off, and landing,
should meet the criteria of CS-25, Appendix F, Part II.
As required by CS-25, Appendix F, mattress foam shall be tested for
12,7-mm (1/2-in.) thickness. If the mattress consists of two or more foams
glued together, the foam specimen should consist of two 6.34-mm (1/4-in.)
(three layers of 4.2 mm (1/6 in.), etc.) pieces glued together. Three
specimens should be made for each combination of foams that are glued together
in the production mattress. Any other production mattress components that are
glued together should also be tested together.
If such specimens do not meet the test criteria of CS-25, Appendix F,
Part I, it is acceptable to test each production mattress component
separately, including a sheet of glue, using the test criteria of Appendix F,
Part I.
Additionally, the Bunsen burner is then to be applied at three separate corners of the production mattress with all its components. The three-corner test does not need to be conducted if the cushion passes the tests of CS-25, Appendix F, Part II.
[Amdt 25/19]
Loading collections...