AMC 25.1541 Markings
and placards — General
ED Decision 2021/015/R
Markings or placards should be placed close to or on (as appropriate) the instrument or control with which they are associated. The terminology and units used should be consistent with those used in the Flight Manual. The units used for markings and placards should be those that are read on the relevant associated instrument.
Publications which are considered to provide appropriate standards for the design substantiation and certification of symbolic placards may include, but are not limited to, ‘General Aviation Manufacturers Association (GAMA) Publication No. 15 — Symbolic Messages’, Initial Issue, 1 March 2014.
EASA accepts the relevant parts of Federal Aviation Administration (FAA) AC 25-17A ‘Transport Airplane Cabin Interiors Crashworthiness Handbook’, of 24 May 2016, as an acceptable means of compliance with CS 25.1541.
Note: ‘relevant parts’ means the AC 25-17A parts that address the applicable Federal Aviation Regulation (FAR)/CS-25 paragraph(s).
[Amdt 25/19]
[Amdt 25/27]
Loading collections...