Navigate / EASA

GM1 Article 4 Certification of ATM/ANS equipment; Article 5 Declaration of design compliance of the ATM/ANS equipment; Article 6 Statement of compliance

ED Decision 2023/016/R

SCOPE OF ATM/ANS EQUIPMENT SUBJECT TO CERTIFICATION, DECLARATION AND STATEMENT OF COMPLIANCE

The table below provides a pictorial representation of which means of conformity assessment applies for the various types of ATM/ANS equipment.

#

Point 3 of Annex VIII ‘Essential requirements for ATM/ANS and air traffic controllers’ to Regulation (EU) 2018/1139

Article 4

Certification of ATM/ANS equipment

Article 5

Declaration of design compliance of the ATM/ANS equipment

Article 6

Statement of compliance

The equipment should include in particular equipment required to support the following functions and services:

1.

airspace management (ASM)

X

2.

air traffic flow management (ATFM)

X

3.

air traffic services (ATS), in particular flight data processing systems, surveillance data processing systems and human-machine interface systems;

 

3a. controller-pilot communications

X

 

 

 

3b. air traffic control (ATC) services when enabling the separation of aircraft or the prevention of collisions

X

 

 

 

3c. other ATS equipment not covered in points 3a and 3b

 

 

X

4.

communications (COM) including ground-to-ground/space, air-to-ground and air-to-air/space communications

4a. ground-to-ground communications

X

4b. air-to-ground communications (i.e. controller–pilot communication)

X

5.

navigation (NAV)

X

6.

surveillance (SUR)

X

7.

aeronautical Information services (AIS)

X

8.

meteorological services (MET)

X