EUR-Lex Regulation 2007/0335
EUR-Lex sourceCOMMISSION REGULATION (EC) No 335/2007
of 28 March 2007
amending Regulation (EC) No 1702/2003 as regards the implementing rules related to environmental certification of aircraft and related products, parts and appliances
(Text with EEA relevance)
THE COMMISSION OF THE EUROPEAN COMMUNITIES,
Having regard to the Treaty establishing the European Community,
Having regard to Regulation (EC) No 1592/2002 of the European Parliament and of the Council of 15 July 2002 on common rules in the field of civil aviation and establishing a European Aviation Safety Agency (1), and in particular Articles 5 and 6 thereof,
Whereas:
|
(1) |
One of the objectives of Regulation (EC) No 1592/2002 is to assist the Member States in fulfilling their obligations under the Chicago Convention by providing a common and uniform implementation of its provisions. |
|
(2) |
Regulation (EC) No 1592/2002 was implemented by Commission Regulation (EC) No 1702/2003 of 24 September 2003 laying down implementing rules for the airworthiness and environmental certification of aircraft and related products, parts and appliances, as well as for the certification of design and production organisations (2). |
|
(3) |
Article 2(1) of Regulation (EC) No 1702/2003 establishes that products, parts and appliances shall be issued certificates as specified in its Annex (Part 21). |
|
(4) |
Appendix VI of the Annex (Part 21) to Regulation (EC) No 1702/2003 specifies the EASA Form 45 to be used for issuing Noise Certificates. |
|
(5) |
Volume I of Annex 16 to the Chicago Convention was amended on 23 February 2005 as regards the standards and guidelines for the administration of Noise Certification Documentation. |
|
(6) |
Some modifications to the provisions of Regulation (EC) No 1702/2003 are needed to bring its Annex in line with the amended Volume I of Annex 16. |
|
(7) |
Regulation (EC) No 1702/2003 should therefore be amended accordingly. |
|
(8) |
The measures provided for by this Regulation are based on the opinion issued by the Agency in accordance with Articles 12(2)(b) and 14(1) of Regulation (EC) No 1592/2002. |
|
(9) |
The measures provided for in this Regulation are in accordance with the opinion of the Committee established by Article 54(3) of Regulation (EC) No 1592/2002, |
HAS ADOPTED THIS REGULATION:
Article 1
The Annex (Part 21) to Regulation (EC) No 1702/2003 is amended as follows:
|
1. |
In Part 21A.204(b)(1)(ii), the sentence ‘This information shall be included in the flight manual, when a flight manual is required by the applicable airworthiness code for the particular aircraft’ is deleted; |
|
2. |
In Part 21A.204(b)(2)(i), the sentence ‘This information shall be included in the flight manual, when a flight manual is required by the applicable airworthiness code for the particular aircraft’ is deleted; |
|
3. |
Appendix VI is replaced by the Annex to this Regulation. |
Article 2
This Regulation shall enter into force on the day of its publication in the Official Journal of the European Union.
This Regulation shall be binding in its entirety and directly applicable in all Member States.
Done at Brussels, 28 March 2007.
For the Commission
Jacques BARROT
Vice-President
ANNEX
Appendix VI — EASA Form 45 Noise Certificate of the Annex (Part 21) is substituted by the following:
For use by State of registry
1. State of registry
2. NOISE CERTIFICATE
3. Document No:
4. Registration marks:
5. Manufacturer and manufacturer’s designation of aircraft:
6. Aircraft serial No:
7. Engine:
8. Propeller: (*)
9. Maximum take-off mass (kg)
10. Maximum landing mass (kg) (*)
11. Noise certification standard:
12. Additional modifications incorporated for the purpose of compliance with the applicable noise certification standards:
13. Lateral/full-power noise level: (*)
14. Approach noise level (*)
15. Flyover noise level (*)
16. Overflight noise level (*)
17. Take-off noise level (*)
Remarks
18. This Noise Certificate is issued pursuant to Annex 16, Volume I to the Convention on International Civil Aviation dated 7 December 1944 and Regulation (EC) No 1592/2002, Article 6 in respect of the abovementioned aircraft, which is considered to comply with the indicated noise standard when maintained and operated in accordance with the relevant requirements and operating limitations.
19. Date of issue
20. Signature
EASA Form 45
(*) These boxes may be omitted depending on noise certification standard.
Analyzing regulation references...