Regulation
(EU) 2019/897
(a) (Reserved)
(b) Before each test is undertaken during the
demonstration of compliance required by point 21.A.20, the applicant shall have verified:
1. for the test specimen, that:
(i) the materials and processes adequately
conform to the specifications for the proposed type design;
(ii) the parts of the products adequately
conform to the drawings in the proposed type design; and
(iii) the manufacturing processes, construction
and assembly adequately conform to those specified in the proposed type
design; and
2. for the test and measuring equipment to
be used for the test, that those are adequate for the test and appropriately
calibrated.
(c) On the basis of the verifications carried
out in accordance with point (b), the applicant shall issue a statement of
conformity listing any potential non-conformity, together with a justification
that this will not affect the test results, and shall allow the Agency to make
an inspection it considers necessary to check the validity of that statement.
(d) The applicant shall allow the Agency to:
1. review any data and information related
to the demonstration of compliance; and
2. witness or carry out any test or
inspection conducted for the purpose of the demonstration of compliance.
(e) For all the tests and inspections
witnessed or carried out by the Agency in accordance with point (d)(2):
1. the applicant shall submit to the Agency
a statement of conformity provided for in point (c); and
2. no change that affects the validity of
the statement of conformity shall be made to the test specimen, or the test
and measuring equipment, between the time the statement of conformity provided
for in point (c) was issued and the time the test
specimen is presented to the Agency for test.