Regulation
(EU) 2019/897
(a) The type design shall consist of:
1. the drawings and specifications, and a
listing of those drawings and specifications, necessary to define the
configuration and the design features of the product shown to comply with the
applicable type-certification basis and environmental protection requirements;
2. information on materials and processes
and on methods of manufacture and assembly of the product necessary to ensure
the conformity of the product;
3. an approved airworthiness limitations
section of the instructions for continued airworthiness as defined by the
applicable certification specifications; and
4. any other data allowing by comparison
the determination of the airworthiness and, if relevant, the environmental
characteristics of later products of the same type.
(b) Each type design shall be adequately
identified.