Part-ML aircraft maintenance programme (AMP)

Aircraft identification

1

Registration(s):

Type:

Serial no(s):

Owner:

Basis for the maintenance programme

2

Instructions for continuing airworthiness (ICA)

Minimum inspection programme (MIP) as detailed in the latest revision of AMC1 ML.A.302(d)

Other MIP complying with ML.A.302(d)

(List the tasks in Appendix A)

Instructions for continuing airworthiness (ICA)

3

Equipment manufacturer and type

Applicable ICA reference (revision/date not required assuming the latest revision will always be used)

For aircraft other than balloons

3a

Aircraft (other than balloons)

3b

Engine (if applicable)

3c

Propeller (if applicable)

For balloons

3d

Envelope (only for balloons)

3e

Basket(s) (only for balloons)

3f

Burner(s) (only for balloons)

3g

Fuel cylinders (only for balloons)

Additional maintenance requirements to the ICA or to the MIP (applicable to all AMPs)

4

Indicate whether any of the following types of repetitive maintenance are included in the AMP (when replying ‘YES’, list the specific requirements in Appendix B)

Yes

No

Maintenance due to specific equipment and modifications

Maintenance due to repairs

Maintenance due to life-limited components (This should be completed only if the MIP is used. Otherwise, this data is already part of the data issued by the DAH or the declarant of a declaration of design compliance used as a basis for the AMP.)

Maintenance due to mandatory continuing airworthiness information (airworthiness limitations (ALIs), certification maintenance requirements (CMRs), specific requirements in the TCDS, etc.)

Maintenance recommendations, such as time between overhaul (TBO) intervals, issued through service bulletins, service letters, and other non-mandatory service information

Maintenance due to repetitive ADs

Maintenance due to specific operational/airspace directives/requirements (altimeter, compass, transponder, etc.)

Maintenance due to the type of operation or operational approvals

Other

Maintenance tasks alternative to the ICA (not less restrictive than the MIP)

5

Indicate whether there is any maintenance task alternative to the ICA (when replying ‘YES’, list the specific alternative maintenance tasks in Appendix C)

Yes

No

Pilot-owner maintenance (only for balloons not operated under Subpart-ADD, or sailplanes not operated under Subpart-DEC, or other aircraft operated under Part-NCO)

Remark: pilot-owner maintenance is not allowed for aircraft operated by a commercial ATO/DTO

6

Does the pilot-owner perform pilot-owner maintenance (ref. ML.A.803)?

If yes, enter the name of the pilot-owner(s) authorised to perform such maintenance:

Pilot-owner name:_(NOTE)__________________Licence number: (NOTE)__________________

Signature: _______________________________Date: _________________________________

NOTE: It is possible to refer to a list in the case of jointly owned aircraft.

Yes

No

Approval/declaration of the maintenance programme (select the appropriate option)

7

Declaration by the owner:

Approval by the contracted CAMO/CAO:

‘I hereby declare that this is the maintenance programme applicable to the aircraft referred to in block 1, and I am fully responsible for its content and, in particular, for any alternatives tasks to the data issued by the DAH or the declarant of a declaration of design compliance.’

Signature/name/date:

Approval reference no of the CAMO/CAO:

Signature/name/date:

Certification statement

8

‘I will ensure that the aircraft is maintained in accordance with this maintenance programme and that the maintenance programme will be reviewed and updated as required.’

Signed by the person/organisation responsible for the continuing airworthiness of the aircraft according to ML.A.201:

Owner/Lessee/operator CAMO/CAO

Name of owner/lessee/operator or CAMO/CAO approval number:

Address:

Telephone/fax:

Email:

Signature/date:

9

Appendices attached:

Appendix A YES NO

Appendix B YES NO

Appendix C YES NO

Appendix D YES NO

Appendix A — Minimum inspection programme (MIP)

(only applicable if a MIP different from the one described in AMC1 ML.A.302(d) is used — see Section 2 above)

Detail the tasks and inspections contained in the MIP being used.

Appendix B — Additional maintenance requirements

(include only if necessary — see Section 4 above)

This appendix is supposed to include only the tasks which are included in the AMP, either at the recommended interval or at a different one.

(All repetitive maintenance tasks not included here, or the interval differences, should be kept by the CAMO/CAO (when contracted) in their files with their corresponding justifications. Appendix D may optionally be used. Nevertheless, the owner/CAMO/CAO is responsible for taking into account all instructions, even if they are not adopted and listed here. The person performing the AR, if reviewing the AMP, is not responsible for the completeness of this appendix, but may do some sampling as part of the investigations and the findings discovered during the physical review).

Task description

References

Interval

(tick box if the selected interval differs from that required in the referenced document)

Maintenance due to specific equipment and modifications

Maintenance due to repairs

Maintenance due to life-limited components (This should be only completed if the MIP is used. Otherwise, this data is already part of the data used as the basis for the AMP.)

Maintenance due to mandatory continuing airworthiness instructions (ALIs, CMRs, specific requirements in the TCDS, etc.)

Maintenance recommendations, such as TBO intervals, issued through service bulletins, service letters, and other non-mandatory service information

Emergency locator transmitters and personal locator beacon — annual testing

EASA SIB 2019-09

1 Year

(if not using MIP or equivalent ICA task) Transponder test

EASA SIB 2011-15

2 Years

Maintenance due to repetitive ADs

Maintenance due to specific operational/airspace directives/requirements (altimeter, compass, transponder, etc.)

Maintenance due to the type of operation or operational approvals

Other

Appendix C — Maintenance tasks alternative to the ICA (not less restrictive than the MIP)

(include only if necessary — see Sections 5 above)

Task description

Recommended interval

Alternative inspection/task

Amended interval

When the ICA are used as the basis for the AMP, this appendix is used to include the tasks alternative to the ICA, which are included in the AMP.

(When a CAMO/CAO is contracted, all elements justifying the deviations from the ICA should be kept by the CAMO/CAO and the organisation should provide a copy of these justifications to the owner.)

Appendix D — Additional information (optional)

This appendix may optionally be used to provide additional information, such as the complete list of AMP tasks or the list of documents (e.g. service bulletins) considered during the development of the AMP.