ED Decision 2006/004/R
1 Applicability
This ETSO gives the requirements which integrated immersion suits for use on helicopters, that are manufactured on or after the date of this ETSO, must meet in order to be identified with the applicable ETSO marking.
2 Procedures
2.1 General
Applicable procedures are detailed in CS-ETSO Subpart A.
2.2 Specific
None.
3 Technical Conditions
3.1 Basic
3.1.1 Minimum Performance Standard
Standards set forth in Appendix 1 to this ETSO.
3.1.2 Environmental Standard
None.
3.2 Specific
None.
4 Marking
4.1 General
Marking is detailed in CS-ETSO Subpart A paragraph 1.2.
4.2 Specific
As given in Appendix 1.
5 Availability of Referenced Document
See CS-ETSO Subpart A paragraph 3.
EN documents may be purchased from the European Committee for Standardisation (CEN), Rue de Stassart 36, B-1050 Brussels, Belgium or any CEN member.
[Amdt ETSO/1]
Loading collections...