What environmental standard applies to devices covered by ETSO-2C128?

The environmental standard is as specified in CS-ETSO Subpart A paragraph 2.1.

Which EASA document and subpart detail the general procedures and marking requirements for ETSO-2C128 devices?

CS-ETSO Subpart A (paragraphs 2.1 for procedures, 4.1 for marking, and 3 for availability of referenced documents).

Are there any specific technical conditions or specific procedures unique to ETSO-2C128 beyond the basic requirements?

No, the section states 'None' for both specific procedures (2.2) and specific technical conditions (3.2).

What computer software requirements apply to devices under ETSO-2C128?

The computer software requirements are as specified in CS-ETSO Subpart A paragraph 2.2.

For devices manufactured on or after which date must they meet the requirements of ETSO-2C128?

The ETSO does not specify a date; it states 'manufactured on or after the date of this ETSO'.

ETSO-2C128

Q: What minimum performance standard must devices that prevent blocked channels in two-way radio communications meet to be eligible for ETSO marking?

The standards set forth in the EUROCAE document ED-67, 'MOPS for Devices that prevent Unintentional or Continuous Transmissions', dated April 1991.

Navigate / EASA

Ask question Discover more Add to collection

ETSO-2C128

ED Decision 2003/10/RM

Devices That Prevent Blocked Channels used in Two-Way Radio Communications Due to Unintentional Transmissions

1 Applicability

This ETSO gives the requirements which devices that prevent blocked channels used in two-way radio communications due to unintentional transmissions, that are manufactured on or after the date of this ETSO must meet, in order to be identified with the applicable ETSO marking.

2 Procedures

2.1 General

Applicable procedures are detailed in CS-ETSO Subpart A.

2.2 Specific

None.

3 Technical Conditions

3.1 Basic

3.1.1 Minimum Performance Standard

Standards set forth in the EUROCAE document ED-67, „MOPS for Devices that prevent Unintentional or Continuous Transmissions“, dated April 1991.

3.1.2 Environmental Standard

See CS-ETSO Subpart A paragraph 2.1

3.1.3 Computer Software

See CS-ETSO Subpart A paragraph 2.2

3.2 Specific

None

4 Marking

4.1 General

Marking is detailed in CS-ETSO Subpart A paragraph .

4.2 Specific

None.

5 Availability of Referenced Document

See CS-ETSO Subpart A paragraph 3.

Details

Source-Title: ETSO-2C128 View latest amendments

Erulesid: ERULES-1963177438-7194 Compare versions

Domain: Initial airworthiness

Amendedby: Initial issue

Applicabilitydate: 24 October, 2003

Entryintoforcedate: 24 October, 2003

Regulatorysource: ED Decision 2003/10/RM Navigate

Regulatorysubject: CS-ETSO

Typeofcontent: CS (Certification specification)

Origin: EASA

Category: EAR