Appendix 1 TO ETSO-C173a – Minimum Performance Standard for
Nickel-Cadmium, Nickel Metal-Hydride, and Lead-Acid Batteries
Amendment to RTCA DO-293A Requirements
ED
Decision
2016/013/R
RTCA/DO-293A
section and title:
Amendment:
1.10.1,
Battery Marking
It
shall be added to the bottom of the list of Manufacturer’s
markings:
11.
End Point Voltage (EPV)
2.3.1,
Rapid Discharge Capacity at 23 °C
It
shall be deleted at the end of the paragraph and the Test Method:
‘or
the manufacturer recommended cutoff voltage’
2.3.2,
Rapid Discharge Capacity at – 30 °C
It
shall be deleted at the end of the paragraph and the Test Method:
‘or
the manufacturer recommended cutoff voltage’
3.12,
Electrolyte Resistance
It
shall be applied ONLY to heater blankets of this section the
following:
Testing
method and evaluation criteria of MIL-PRF-8565 can be utilised in
lieu of the testing method and evaluation criteria stipulated in
paragraph 3.12 of RTCA /DO-293A.
[Amdt ETSO/11]
Details
Source-Title:Appendix 1 TO ETSO-C173a - Minimum Performance Standard for Nickel-Cadmium, Nickel Metal-Hydride, and Lead-Acid Batteries Amendment to RTCA DO-293A RequirementsView latest amendments