AMC 25.145(e) Longitudinal control
ED
Decision 2003/2/RM
If gates
are provided, CS 25.145(e) requires the first gate from the maximum
landing position to be located at a position corresponding to a go-around
configuration. If there are multiple go-around configurations, the following
criteria should be considered when selecting the location of the gate:
a. The expected relative frequency of use
of the available go-around configurations.
b. The effects of selecting the incorrect
high-lift device control position.
c. The potential for the pilot to select
the incorrect control position, considering the likely situations for use of
the different go-around positions.
d. The extent to which the gate(s) aid the
pilot in quickly and accurately selecting the correct position of the
high-lift devices.
Loading collections...