ED Decision 2003/2/RM
(a) Maximum weights. Maximum weights corresponding to the aeroplane operating conditions (such as ramp, ground taxi, take-off, en-route and landing) environmental conditions (such as altitude and temperature), and loading conditions (such as zero fuel weight, centre of gravity position and weight distribution) must be established so that they are not more than –
(1) The highest weight selected by the applicant for the particular conditions; or
(2) The highest weight at which compliance with each applicable structural loading and flight requirement is shown.
(3) The highest weight at which compliance is shown with the noise certification requirements.
(b) Minimum weight. The minimum weight (the lowest weight at which compliance with each applicable requirement of this CS-25 is shown) must be established so that it is not less than –
(1) The lowest weight selected by the applicant;
(2) The design minimum weight (the lowest weight at which compliance with each structural loading condition of this CS-25 is shown); or
(3) The lowest weight at which compliance with each applicable flight requirement is shown.
Loading collections...