Navigate / EASA

FCL.930.TRI TRI – Training course

Regulation (EU) 2019/1747

(a)     The TRI training course shall be conducted in the aircraft only if no FSTD is available and accessible and shall include:

(1)     25 hours of teaching and learning;

(2)     10 hours of technical training, including revision of technical knowledge, the preparation of lesson plans and the development of classroom/simulator instructional skills;

(3)     5 hours of flight instruction on the appropriate aircraft or an FSTD representing that aircraft for single-pilot aircraft and 10 hours for multi-pilot aircraft or an FSTD representing that aircraft;

(4)      the following training, as applicable:

(i)       additional specific training before conducting LIFUS;

(ii)      additional specific training before conducting landing training. That training in the FSTD shall include training for emergency procedures related to the aircraft.

(b)     Applicants holding or having held an instructor certificate shall be fully credited towards the requirement of (a)(1).

(c)      An applicant for a TRI certificate who holds an SFI certificate for the relevant type shall be fully credited towards the requirements of this paragraph for the issue of a TRI certificate restricted to flight instruction in simulators.