CS 25J1043 Cooling tests

• ED Decision 2005/006/R found in: CS-25 Amdt 27 - Large Aeroplanes (Jan 2023)

CS 25J1043 Cooling tests ED Decision 2005/006/R (a) General. Compliance with [CS 25J1041](#_DxCrossRefBm1709821911) must be shown by tests, under critical conditions. For these tests, the following apply: (1) If the tests are conducted under conditions deviating from the maximum ambient atmospheric temperature, the recorded APU temperatures must be corrected under sub-paragraph (c) of this paragraph. (2) No corrected temperatures determined under sub-paragraph (a)(1) of this paragraph may exceed established limits. (b) Maximum ambient atmospheric temperature. A maximum ambient atmospheric temperature corresponding to sea level conditions must be established. The temperature lapse rate is 2.0°C per 300 metres of altitude above sea level until a temperature of -56.5°C is reached, above which altitude, the temperature is considered constant at -56.5°C. (c) Correction factor. Unless a more rational correction applies, temperatures of APU fluids and components for which temperature limits are established, must be corrected by adding to them the difference between the maximum ambient atmospheric temperature and the temperature of the ambient air at the time of the first occurrence of the maximum component or fluid temperature recorded during the cooling test. [Amdt 25/1]