Appendix 1 to ETSO-C23f - Minimum Performance Standard for Personnel Parachute Assemblies and Components

• ED Decision 2018/002/R found in: CS-ETSO Amdt 17 - European Technical Standard Orders (Oct 2026)

###### Appendix 1 to ETSO-C23f – Minimum Performance Standard for Personnel Parachute Assemblies and Components *ED Decision 2018/002/R* This Appendix prescribes the MPS for a personnel parachute assembly and its components. The applicable standard is PIA TS-135 Revision 1.4, issued April 22, 2010, Performance Standards for Personnel Parachute Assemblies and Components, as modified for this ETSO: 1. Page 2, replace paragraph 2.1.i. to read as follows: ‘Cognisant Agency’ — The European Aviation Safety Agency (EASA). 2. Page 2, replace paragraph 2.1.a. to read as follows: ‘Administrator’ — EASA. 3. Page 5, paragraph 4.1.2. delete: ‘generally’. Stitching should not ravel when it is broken. ‘Generally’ reduces the requirement for stitch choice, and adversely impacts the current standard. 4. Page 5, paragraph 4.1.3.delete: ‘Ref: Table 2’. Table 2 is not relevant to this requirement. Testing of a packed assembly will show if the main parachute will interfere with the proper function of the reserve parachute. 5. Page 8, paragraph 4.3.5.3 replace ‘a 200 lbf (889.6 N)’ with ‘the greater of (200 lbf (889.6 N)) and the (maximum operating weight times 0.84)’. To ensure that the compression load is at least the compression load of the body without legs and feet. 6. Page 9, paragraph 4.3.7. in first sentence delete: ‘a weight not more than’. The worst case is the maximum operating weight. 7. Page 11, paragraph 4.3.11. in the first sentence delete ‘not more than’. The worst case is the maximum operating weight. 8. Page 11, disregard paragraph 4.3.9.1., Rate of Descent Tests (Method 2). 9. Page 14, Table 1, under Marking Data Requirements, replace: Statement of Authorisation under TS0-C-23e and/or (J) TSO-C-23e if applicable. with: Statement of Authorisation under ETSO-C23f. [Amdt ETSO/13]