Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
ETSO-C161b
Available versions for ERULES-1963177438-9152
ED Decision 2022/018/R
found in: CS-ETSO Amdt 17 - European Technical Standard Orders (Oct 2026)
Version
CS-ETSO Amdt 17 - ... (Oct 2026)
Section
Share
Version
Show details
Hide details
Version
#### ETSO-C161b *ED Decision 2022/018/R* ##### Ground-Based Augmentation System Positioning and Navigation Equipment **1 Applicability** This ETSO provides the requirements that Ground-Based Augmentation System Positioning and Navigation Equipment that is designed and manufactured on or after the date of this ETSO must meet in order to be identified with the applicable ETSO marking. **2 Procedures** 2.1 General The applicable procedures are detailed in CS-ETSO, [Subpart A](#_DxCrossRefBm920220672). 2.2 Specific None. **3 Technical Conditions** 3.1 Basic 3.1.1 Minimum Performance Standard The applicable standard is that provided in (RTCA) document RTCA/DO-253D Change 1, Section 2, for GBAS airborne equipment class (GAEC) C to support GBAS Approach Service Type (GAST) C, or GAEC D to support both GAST C and GAST D approach service types. This ETSO also applies to equipment that implements the optional GBAS positioning service as defined in RTCA/DO-253D Change 1, Section 2.3. The standards of this ETSO apply to equipment intended to output deviations relative to a precision approach path using GBAS, and to provide position information to a navigation management unit that outputs deviation commands referenced to a desired flight path. The positioning and navigation functions are defined in section 2.3 of RTCA/DO-253D Change 1. In accordance with section 2.1 of RTCA/DO-253D Change 1, equipment obtaining this ETSOA must also comply with the position, velocity and time (PVT) output requirements of either, ETSO‑C145e, ETSO‑C146e or ETSO‑C196b. 3.1.2 Environmental Standard See CS-ETSO Subpart A, paragraph 2.1. The required performance is defined in RTCA/DO253D, Change 1, section 2.4. 3.1.3 Software See CS-ETSO, Subpart A, paragraph 2.2. 3.1.4 Airborne Electronic Hardware See CS-ETSO, Subpart A, paragraph 2.3. 3.2 Specific 3.2.1 Failure Condition Classification See CS-ETSO, Subpart A, paragraph 2.4. **4 Marking** 4.1 General See CS-ETSO, Subpart A, paragraph 1.2. 4.2 Specific None. **5 Availability of Referenced Documents** See CS-ETSO, Subpart A, paragraph 3 [Amdt ETSO/3] [Amdt ETSO/7] [Amdt ETSO/17]
Contact support