CS 25.115 Take-off flight path

• ED Decision 2003/2/RM found in: CS-25 Amdt 27 - Large Aeroplanes (Jan 2023)

CS 25.115 Take-off flight path ED Decision 2003/2/RM (a) The take-off flight path must be considered to begin 11 m (35 ft) above the take-off surface at the end of the take-off distance determined in accordance with [CS 25.113(a) or (b)](#_DxCrossRefBm1709820675) as appropriate for the runway surface condition. (b) The net take-off flight path data must be determined so that they represent the actual take-off flight paths (determined in accordance with [CS 25.111](#_DxCrossRefBm1709820676) and with sub-paragraph (a) of this paragraph) reduced at each point by a gradient of climb equal to – (1) 0·8% for two-engined aeroplanes; (2) 0·9% for three-engined aeroplanes; and (3) 1·0% for four-engined aeroplanes. (c) The prescribed reduction in climb gradient may be applied as an equivalent reduction in acceleration along that part of the take-off flight path at which the aeroplane is accelerated in level flight.