M.A.501 Classification and installation

• Regulation (EU) 2022/1360 found in: Continuing Airworthiness (1321/2014) Part-M Part-145 Part-66 Part-147 Part-T Part-ML Part-CAMO Part-CAO (Jul 2024)

M.A.501 Classification and installation Regulation (EU) 2022/1360 (a) All components shall be classified into the following categories: (1) Components which are in a satisfactory condition, released on an EASA Form 1 or equivalent and marked in accordance with Subpart Q of Annex I (Part 21) or, as applicable, Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012, unless otherwise specified in point 21.A.307 of Annex I (Part 21) or point 21L.A.193 of Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012 or in this Annex (Part-M) or in Annex Vd (Part-CAO). (2) Unserviceable components which shall be maintained in accordance with this Regulation. (3) Components categorised as unsalvageable because they have reached their mandatory life limitation or contain a non-repairable defect. (4) Standard parts used on an aircraft, engine, propeller or other aircraft component when specified in the maintenance data and accompanied by evidence of conformity traceable to the applicable standard. (5) Material both raw and consumable used in the course of maintenance when the organisation is satisfied that the material meets the required specification and has appropriate traceability. All materials must be accompanied by documentation clearly relating to the particular material and containing a conformity to specification statement plus both the manufacturing and supplier source. (b) Components, standard parts and material shall only be installed on an aircraft or a component when they are in a satisfactory condition, belong to one of the categories listed in point (a) and the applicable maintenance data specifies the particular component, standard part or material. #### M.A.501 Classification and installation *Regulation (EU) 2022/1360* (a) All components shall be classified into the following categories: (1) Components which are in a satisfactory condition, released on an EASA Form 1 or equivalent and marked in accordance with Subpart Q of Annex I (Part 21) or, as applicable, Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012, unless otherwise specified in point 21.A.307 of Annex I (Part 21) or point 21L.A.193 of Annex Ib (Part 21 Light) to Regulation (EU) No 748/2012 or in this Annex (Part-M) or in Annex Vd (Part-CAO). (2) Unserviceable components which shall be maintained in accordance with this Regulation. (3) Components categorised as unsalvageable because they have reached their mandatory life limitation or contain a non-repairable defect. (4) Standard parts used on an aircraft, engine, propeller or other aircraft component when specified in the maintenance data and accompanied by evidence of conformity traceable to the applicable standard. (5) Material both raw and consumable used in the course of maintenance when the organisation is satisfied that the material meets the required specification and has appropriate traceability. All materials must be accompanied by documentation clearly relating to the particular material and containing a conformity to specification statement plus both the manufacturing and supplier source. (b) Components, standard parts and material shall only be installed on an aircraft or a component when they are in a satisfactory condition, belong to one of the categories listed in point (a) and the applicable maintenance data specifies the particular component, standard part or material.