Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
CS 23.2255 Protection of structure
Available versions for ERULES-1963177438-6850
ED Decision 2017/013/R
found in: CS-23 Amdt 5 AMC-GM Issue 3 - Normal-Category Aeroplanes (Jul 2020)
From
CS-23 Amdt 6 AMC-G... (May 2026)
CS-23 Amdt 6 AMC-G... (Mar 2023)
CS-23 Amdt 5 AMC-G... (Jul 2020)
From section
To
CS-23 Amdt 6 AMC-G... (May 2026)
CS-23 Amdt 6 AMC-G... (Mar 2023)
CS-23 Amdt 5 AMC-G... (Jul 2020)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
CS 23.2255 Protection of structure ED Decision 2017/013/R (a) Each part of the aeroplane, including small parts such as fasteners, must be protected against deterioration or loss of strength due to any cause likely to occur in the expected operational environment. (b) Each part of the aeroplane must have adequate provisions for ventilation and drainage. (c) For each part that requires maintenance, preventive maintenance, or servicing, the applicant must incorporate a means into the aeroplane design to allow such actions to be accomplished.
CSÂ 23.2255 Protection of structure ED Decision 2017/013/R (a)Â Â Â Â Each part of the aeroplane, including small parts such as fasteners, must be protected against deterioration or loss of strength due to any cause likely to occur in the expected operational environment. (b)Â Â Â Â Each part of the aeroplane must have adequate provisions for ventilation and drainage. (c)Â Â Â Â Â For each part that requires maintenance, preventive maintenance, or servicing, the applicant must incorporate a means into the aeroplane design to allow such actions to be accomplished.
#### CSÂ 23.2255 Protection of structure *ED Decision 2017/013/R* (a) Each part of the aeroplane, including small parts such as fasteners, must be protected against deterioration or loss of strength due to any cause likely to occur in the expected operational environment. (b) Each part of the aeroplane must have adequate provisions for ventilation and drainage. (c) For each part that requires maintenance, preventive maintenance, or servicing, the applicant must incorporate a means into the aeroplane design to allow such actions to be accomplished.