Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
CS 23.2210 Structural design loads
Available versions for ERULES-1963177438-6830
ED Decision 2017/013/R
found in: CS-23 Amdt 6 AMC-GM Issue 4 - Normal-Category Aeroplanes (Mar 2023)
From
CS-23 Amdt 6 AMC-G... (May 2026)
CS-23 Amdt 6 AMC-G... (Mar 2023)
CS-23 Amdt 5 AMC-G... (Jul 2020)
From section
To
CS-23 Amdt 6 AMC-G... (May 2026)
CS-23 Amdt 6 AMC-G... (Mar 2023)
CS-23 Amdt 5 AMC-G... (Jul 2020)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
CSÂ 23.2210 Structural design loads ED Decision 2017/013/R (a)Â Â Â Â The applicant must: (1)Â Â Â Â determine structural design loads resulting from likely externally or internally applied pressure, force or moment which may occur in flight, ground and water operations, ground- and water- handling, and while the aeroplane is parked or moored; (2)Â Â Â Â determine the loads required by CSÂ 23.2210(a)(1) at all critical combinations of parameters, on and within the boundaries of the structural design envelope; and (3)Â Â Â Â the magnitude and distribution of these loads must be based on established physical principles within the structural design envelope.
CS 23.2210 Structural design loads ED Decision 2017/013/R (a) The applicant must: (1) determine structural design loads resulting from likely externally or internally applied pressure, force or moment which may occur in flight, ground and water operations, ground- and water- handling, and while the aeroplane is parked or moored; (2) determine the loads required by CS 23.2210(a)(1) at all critical combinations of parameters, on and within the boundaries of the structural design envelope; and (3) the magnitude and distribution of these loads must be based on established physical principles within the structural design envelope.
#### CSÂ 23.2210 Structural design loads *ED Decision 2017/013/R* (a) The applicant must: (1) determine structural design loads resulting from likely externally or internally applied pressure, force or moment which may occur in flight, ground and water operations, ground- and water- handling, and while the aeroplane is parked or moored; (2) determine the loads required by CSÂ 23.2210(a)(1) at all critical combinations of parameters, on and within the boundaries of the structural design envelope; and (3) the magnitude and distribution of these loads must be based on established physical principles within the structural design envelope.