Appendix A - Instructions for Continued Airworthiness

• ED Decision 2020/006/R found in: CS-29 Amdt 11 - Large Rotercraft (Feb 2023)

Appendix A – Instructions for Continued Airworthiness ED Decision 2020/006/R A29.1 General (a) This appendix specifies requirements for the preparation of instructions for continued airworthiness as required by [CS 29.1529](#_DxCrossRefBm1178331852). (b) The instructions for continued airworthiness for each rotorcraft must include the instructions for continued airworthiness for each engine and rotor (hereinafter designated ‘products’), for each appliance required by any applicable CS or operating rule, and any required information relating to the interface of those appliances and products with the rotorcraft. If instructions for continued airworthiness are not supplied by the manufacturer of an appliance or product installed in the rotorcraft, the instructions for continued airworthiness for the rotorcraft must include the information essential to the continued airworthiness of the rotorcraft. A29.2 Format (a) The instructions for continued airworthiness must be in the form of a manual or manuals as appropriate for the quantity of data to be provided. (b) The format of the manual or manuals must provide for a practical arrangement. A29.3 Content The contents of the manual or manuals must be prepared in a language acceptable to the Agency. The instructions for continued airworthiness must contain the following manuals or sections, as appropriate, and information: (a) Rotorcraft maintenance manual or section. (1) Introduction information that includes an explanation of the rotorcraft’s features and data to the extent necessary for maintenance or preventive maintenance. (2) A description of the rotorcraft and its systems and installations including its engines, rotors, and appliances. (3) Basic control and operation information describing how the rotorcraft components and systems are controlled and how they operate, including any special procedures and limitations that apply. (4) Servicing information that covers details regarding servicing points, capacities of tanks, reservoirs, types of fluids to be used, pressures applicable to the various systems, location of access panels for inspection and servicing, locations of lubrication points, the lubricants to be used, equipment required for servicing, tow instructions and limitations, mooring, jacking, and levelling information. (b) Maintenance Instructions. (1) Scheduling information for each part of the rotorcraft and its engines, auxiliary power units, rotors, accessories, instruments, and equipment that provides the recommended periods at which they should be cleaned, inspected, adjusted, tested, and lubricated, and the degree of inspection, the applicable wear tolerances, and work recommended at these periods. However, it is allowed to refer to an accessory, instrument, or equipment manufacturer as the source of this information if it is shown that the item has an exceptionally high degree of complexity requiring specialised maintenance techniques, test equipment, or expertise. The recommended overhaul periods and necessary cross references to the airworthiness limitations section of the manual must also be included. In addition, an inspection program that includes the frequency and extent of the inspections necessary to provide for the continued airworthiness of the rotorcraft must be included. (2) Trouble-shooting information describing probable malfunctions, how to recognise those malfunctions, and the remedial action for those malfunctions. (3) Information describing the order and method of removing and replacing products and parts with any necessary precautions to be taken. (4) Other general procedural instructions including procedures for system testing during ground running, symmetry checks, weighing and determining the centre of gravity, lifting and shoring, and storage limitations. (c) Diagrams of structural access plates and information needed to gain access for inspections when access plates are not provided. (d) Details for the application of special inspection techniques including radiographic and ultrasonic testing where such processes are specified. (e) Information needed to apply protective treatments to the structure after inspection. (f) All data relative to structural fasteners such as identification, discard recommendations, and torque values. (g) A list of special tools needed. A29.4 Airworthiness Limitations Section The instructions for continued airworthiness must contain a section titled airworthiness limitations that is segregated and clearly distinguishable from the rest of the document. This section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection required for type-certification. If the instructions for continued airworthiness consist of multiple documents, the section required by this paragraph must be included in the principal manual. This section must contain a legible statement in a prominent location that reads – ‘The airworthiness limitations section is approved and variations must also be approved’. A29.5 Information system security Instructions for Continued Airworthiness The applicant must prepare Instructions for Continued Airworthiness (ICA) that are applicable to aircraft information system security protection as required by [CS 29.1319](#_DxCrossRefBm1178332126) (see AMC 20-42 Section 9). [Amdt No: 29/2] [Amdt No: 29/3] [Amdt No: 29/8] Appendix A – Instructions for Continued Airworthiness ED Decision 2020/006/R A29.1 General (a) This appendix specifies requirements for the preparation of instructions for continued airworthiness as required by [CS 29.1529](#_DxCrossRefBm1513259459). (b) The instructions for continued airworthiness for each rotorcraft must include the instructions for continued airworthiness for each engine and rotor (hereinafter designated ‘products’), for each appliance required by any applicable CS or operating rule, and any required information relating to the interface of those appliances and products with the rotorcraft. If instructions for continued airworthiness are not supplied by the manufacturer of an appliance or product installed in the rotorcraft, the instructions for continued airworthiness for the rotorcraft must include the information essential to the continued airworthiness of the rotorcraft. A29.2 Format (a) The instructions for continued airworthiness must be in the form of a manual or manuals as appropriate for the quantity of data to be provided. (b) The format of the manual or manuals must provide for a practical arrangement. A29.3 Content The contents of the manual or manuals must be prepared in a language acceptable to the Agency. The instructions for continued airworthiness must contain the following manuals or sections, as appropriate, and information: (a) Rotorcraft maintenance manual or section. (1) Introduction information that includes an explanation of the rotorcraft’s features and data to the extent necessary for maintenance or preventive maintenance. (2) A description of the rotorcraft and its systems and installations including its engines, rotors, and appliances. (3) Basic control and operation information describing how the rotorcraft components and systems are controlled and how they operate, including any special procedures and limitations that apply. (4) Servicing information that covers details regarding servicing points, capacities of tanks, reservoirs, types of fluids to be used, pressures applicable to the various systems, location of access panels for inspection and servicing, locations of lubrication points, the lubricants to be used, equipment required for servicing, tow instructions and limitations, mooring, jacking, and levelling information. (b) Maintenance Instructions. (1) Scheduling information for each part of the rotorcraft and its engines, auxiliary power units, rotors, accessories, instruments, and equipment that provides the recommended periods at which they should be cleaned, inspected, adjusted, tested, and lubricated, and the degree of inspection, the applicable wear tolerances, and work recommended at these periods. However, it is allowed to refer to an accessory, instrument, or equipment manufacturer as the source of this information if it is shown that the item has an exceptionally high degree of complexity requiring specialised maintenance techniques, test equipment, or expertise. The recommended overhaul periods and necessary cross references to the airworthiness limitations section of the manual must also be included. In addition, an inspection program that includes the frequency and extent of the inspections necessary to provide for the continued airworthiness of the rotorcraft must be included. (2) Trouble-shooting information describing probable malfunctions, how to recognise those malfunctions, and the remedial action for those malfunctions. (3) Information describing the order and method of removing and replacing products and parts with any necessary precautions to be taken. (4) Other general procedural instructions including procedures for system testing during ground running, symmetry checks, weighing and determining the centre of gravity, lifting and shoring, and storage limitations. (c) Diagrams of structural access plates and information needed to gain access for inspections when access plates are not provided. (d) Details for the application of special inspection techniques including radiographic and ultrasonic testing where such processes are specified. (e) Information needed to apply protective treatments to the structure after inspection. (f) All data relative to structural fasteners such as identification, discard recommendations, and torque values. (g) A list of special tools needed. A29.4 Airworthiness Limitations Section The instructions for continued airworthiness must contain a section titled airworthiness limitations that is segregated and clearly distinguishable from the rest of the document. This section must set forth each mandatory replacement time, structural inspection interval, and related structural inspection required for type-certification. If the instructions for continued airworthiness consist of multiple documents, the section required by this paragraph must be included in the principal manual. This section must contain a legible statement in a prominent location that reads – ‘The airworthiness limitations section is approved and variations must also be approved’. A29.5 Information system security Instructions for Continued Airworthiness The applicant must prepare Instructions for Continued Airworthiness (ICA) that are applicable to aircraft information system security protection as required by [CS 29.1319](#_DxCrossRefBm1513259712) (see AMC 20-42 Section 9). [Amdt No: 29/2] [Amdt No: 29/3] [Amdt No: 29/8]