Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
CS 29.305 Strength and deformation
Available versions for ERULES-1963177438-5588
ED Decision 2003/16/RM
found in: CS-29 Amdt 11 - Large Rotercraft (Feb 2023)
From
CS-29 Amdt 12 - La... (Mar 2026)
CS-29 Amdt 11 - La... (Feb 2023)
CS-29 Amdt 10 - La... (Jan 2023)
From section
To
CS-29 Amdt 12 - La... (Mar 2026)
CS-29 Amdt 11 - La... (Feb 2023)
CS-29 Amdt 10 - La... (Jan 2023)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
CS 29.305 Strength and deformation ED Decision 2003/16/RM (a) The structure must be able to support limit loads without detrimental or permanent deformation. At any load up to limit loads, the deformation may not interfere with safe operation. (b) The structure must be able to support ultimate loads without failure. This must be shown by: (1) Applying ultimate loads to the structure in a static test for at least 3 seconds; or (2) Dynamic tests simulating actual load application.
CS 29.305 Strength and deformation ED Decision 2003/16/RM (a) The structure must be able to support limit loads without detrimental or permanent deformation. At any load up to limit loads, the deformation may not interfere with safe operation. (b) The structure must be able to support ultimate loads without failure. This must be shown by: (1) Applying ultimate loads to the structure in a static test for at least 3 seconds; or (2) Dynamic tests simulating actual load application.
#### CS 29.305 Strength and deformation *ED Decision 2003/16/RM* (a) The structure must be able to support limit loads without detrimental or permanent deformation. At any load up to limit loads, the deformation may not interfere with safe operation. (b) The structure must be able to support ultimate loads without failure. This must be shown by: (1) Applying ultimate loads to the structure in a static test for at least 3 seconds; or (2) Dynamic tests simulating actual load application.