CS 29.1091 Air induction

• ED Decision 2003/16/RM found in: CS-29 Amdt 10 - Large Rotercraft (Jan 2023)

CS 29.1091 Air induction ED Decision 2003/16/RM (a) The air induction system for each engine and auxiliary power unit must supply the air required by that engine and auxiliary power unit under the operating conditions for which certification is requested. (b) Each engine and auxiliary power unit air induction system must provide air for proper fuel metering and mixture distribution with the induction system valves in any position. (c) No air intake may open within the engine accessory section or within other areas of any powerplant compartment where emergence of backfire flame would constitute a fire hazard. (d) Each reciprocating engine must have an alternate air source. (e) Each alternate air intake must be located to prevent the entrance of rain, ice, or other foreign matter. (f) For turbine engine powered rotorcraft and rotorcraft incorporating auxiliary power units: (1) There must be means to prevent hazardous quantities of fuel leakage or overflow from drains, vents, or other components of flammable fluid systems from entering the engine or auxiliary power unit intake system; and (2) The air inlet ducts must be located or protected so as to minimise the ingestion of foreign matter during take-off, landing, and taxying. CS 29.1091 Air induction ED Decision 2003/16/RM (a) The air induction system for each engine and auxiliary power unit must supply the air required by that engine and auxiliary power unit under the operating conditions for which certification is requested. (b) Each engine and auxiliary power unit air induction system must provide air for proper fuel metering and mixture distribution with the induction system valves in any position. (c) No air intake may open within the engine accessory section or within other areas of any powerplant compartment where emergence of backfire flame would constitute a fire hazard. (d) Each reciprocating engine must have an alternate air source. (e) Each alternate air intake must be located to prevent the entrance of rain, ice, or other foreign matter. (f) For turbine engine powered rotorcraft and rotorcraft incorporating auxiliary power units: (1) There must be means to prevent hazardous quantities of fuel leakage or overflow from drains, vents, or other components of flammable fluid systems from entering the engine or auxiliary power unit intake system; and (2) The air inlet ducts must be located or protected so as to minimise the ingestion of foreign matter during take-off, landing, and taxying. #### CS 29.1091 Air induction *ED Decision 2003/16/RM* (a) The air induction system for each engine and auxiliary power unit must supply the air required by that engine and auxiliary power unit under the operating conditions for which certification is requested. (b) Each engine and auxiliary power unit air induction system must provide air for proper fuel metering and mixture distribution with the induction system valves in any position. (c) No air intake may open within the engine accessory section or within other areas of any powerplant compartment where emergence of backfire flame would constitute a fire hazard. (d) Each reciprocating engine must have an alternate air source. (e) Each alternate air intake must be located to prevent the entrance of rain, ice, or other foreign matter. (f) For turbine engine powered rotorcraft and rotorcraft incorporating auxiliary power units: (1) There must be means to prevent hazardous quantities of fuel leakage or overflow from drains, vents, or other components of flammable fluid systems from entering the engine or auxiliary power unit intake system; and (2) The air inlet ducts must be located or protected so as to minimise the ingestion of foreign matter during take-off, landing, and taxying.