AMC 31HB.27(d) Strength and proof of strength

• ED Decision 2009/005/R found in: CS-31HB Amdt 1 - Hot Air Balloons (Dec 2011)

AMC 31HB.27(d) Strength and proof of strength ED Decision 2009/005/R A drop test should be performed if it is not possible to make use of an existing proven basket of the same or similar design (in terms of construction method, size, layout etc.) for a balloon of the size that is the subject of the application. In the absence of an alternative test proposal, this test should be performed at the maximum design mass of the basket in a manner that simulates the effects of gravity that occur as realistically as possible. The basket is dropped onto a horizontal concrete surface from a height of 1 m at 0°, 15° and 30°. The drop test should not result in deformation or fractures which, by their nature, could lead to the serious injury of occupants. Note: It has been shown by a number of decades of in-service experience that the traditional reinforced woven wicker and willow basket design offers a combination of resilience and impact resistance that can contribute considerably to the protection of occupants. The structure is also able to absorb considerable kinetic energy during impact on the ground or against obstacles.