Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
21.A.606 Requirements for the issuance of an ETSO authorisation
Available versions for ERULES-1963177438-3965
Regulation (EU) 2019/897
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
21.A.606 Requirements for the issuance of an ETSO authorisation Regulation (EU) 2019/897 In order to be issued an ETSO authorisation, the applicant shall: (a)    demonstrate its capability in accordance with point [21.A.602B](#_DxCrossRefBm1649096928); (b)    demonstrate that the article complies with the technical conditions of the applicable ETSO or with deviations therefrom approved in accordance with point [21.A.610](#_DxCrossRefBm1649097441), if any; (c)     comply with the requirements of this Subpart; and (d)    declare that no feature or characteristic has been identified that may make the article unsafe for the uses for which certification is requested.
#### 21.A.606 Requirements for the issuance of an ETSO authorisation *Regulation (EU) 2019/897* In order to be issued an ETSO authorisation, the applicant shall: (a) demonstrate its capability in accordance with point [21.A.602B](#_DxCrossRefBm485230419); (b) demonstrate that the article complies with the technical conditions of the applicable ETSO or with deviations therefrom approved in accordance with point [21.A.610](#_DxCrossRefBm485230934), if any; (c) comply with the requirements of this Subpart; and (d) declare that no feature or characteristic has been identified that may make the article unsafe for the uses for which certification is requested.