Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
21.A.602B Demonstration of capability
Available versions for ERULES-1963177438-3958
Regulation (EU) No 748/2012
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
21.A.602B Demonstration of capability Regulation (EU) No 748/2012 Any applicant for an ETSO authorisation shall demonstrate its capability as follows: (a) for production, by holding a production organisation approval, issued in accordance with Subpart G, or through compliance with Subpart F procedures; and (b) for design: 1. for an Auxiliary Power Unit, by holding a design organisation approval, issued by the Agency in accordance with Subpart J; 2. for all other articles, by using procedures setting out the specific design practices, resources and sequence of activities necessary to comply with this [Annex I](#_DxCrossRefBm1649096856) (Part 21).
#### 21.A.602B Demonstration of capability *Regulation (EU) No 748/2012* Any applicant for an ETSO authorisation shall demonstrate its capability as follows: (a) for production, by holding a production organisation approval, issued in accordance with Subpart G, or through compliance with Subpart F procedures; and (b) for design: 1. for an Auxiliary Power Unit, by holding a design organisation approval, issued by the Agency in accordance with Subpart J; 2. for all other articles, by using procedures setting out the specific design practices, resources and sequence of activities necessary to comply with this [Annex I](#_DxCrossRefBm485230346) (Part 21).