21.A.432B Demonstration of capability

• Regulation (EU) 2019/897 found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

21.A.432B Demonstration of capability Regulation (EU) 2019/897 (a)     An applicant for approval of a major repair design shall demonstrate its capability by holding a design organisation approval, issued by the Agency in accordance with Subpart J. (b)     By way of derogation from point (a), as an alternative procedure to demonstrate its capability, an applicant may seek Agency agreement for the use of procedures setting out the specific design practices, resources and sequence of activities necessary to comply with this Subpart. (c)      By way of derogation from point (a), in the case of products referred to in point [21.A.14](#_DxCrossRefBm1649096927)(c), an applicant may demonstrate its capability by obtaining the Agency's acceptance of its certification programme established in accordance with point [21.A.432C](#_DxCrossRefBm1649096984)(b). #### 21.A.432B Demonstration of capability *Regulation (EU) 2019/897* (a) An applicant for approval of a major repair design shall demonstrate its capability by holding a design organisation approval, issued by the Agency in accordance with Subpart J. (b) By way of derogation from point (a), as an alternative procedure to demonstrate its capability, an applicant may seek Agency agreement for the use of procedures setting out the specific design practices, resources and sequence of activities necessary to comply with this Subpart. (c) By way of derogation from point (a), in the case of products referred to in point [21.A.14](#_DxCrossRefBm485230418)(c), an applicant may demonstrate its capability by obtaining the Agency's acceptance of its certification programme established in accordance with point [21.A.432C](#_DxCrossRefBm485230475)(b).