AMC2 21.A.243(a) Handbook

• ED Decision 2022/021/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

AMC2 21.A.243(a) Handbook ED Decision 2022/021/R TYPICAL CONTENT OF HANDBOOK FOR ORGANISATIONS THAT DESIGN MINOR CHANGES TO TYPE DESIGN OR MINOR REPAIRS TO PRODUCTS The following is a typical table of contents for the handbook: Part 1. Organisation 1.1     Objective of the handbook and binding statement 1.2     Responsible person for the administration of the handbook 1.3     Amendment procedure 1.4     List of effective pages 1.5     Distribution list 1.6     Presentation of the design organisation (DO) (including locations) 1.7     Scope of work (with identification of type and models of products) 1.8     Organisation charts 1.9     Human resources 1.10   Management staff 1.11   Certifying personnel (see [GM2 21.A.243(d)](#_DxCrossRefBm1649097349), point 2) 1.12   Independent system monitoring 1.13   Safety management system Part 2. Procedures 2.1     Management of changes to type design and design of repairs: — configuration control, —        classification, and —        approval of minor changes to type design and minor repairs 2.2     Control of design subcontractors 2.3     Collecting/Investigating of failures, malfunctions, and defects 2.4     Coordination with production 2.5     Documentation control —        in relation to the changes and repairs, and —        in relation to failures/malfunctions and defects (i.e. services bulletins) 2.6     Record-keeping ##### AMC2 21.A.243(a) Handbook *ED Decision 2022/021/R* **TYPICAL CONTENT OF HANDBOOK FOR ORGANISATIONS THAT DESIGN MINOR CHANGES TO TYPE DESIGN OR MINOR REPAIRS TO PRODUCTS** The following is a typical table of contents for the handbook: Part 1. Organisation 1.1 Objective of the handbook and binding statement 1.2 Responsible person for the administration of the handbook 1.3 Amendment procedure 1.4 List of effective pages 1.5 Distribution list 1.6 Presentation of the design organisation (DO) (including locations) 1.7 Scope of work (with identification of type and models of products) 1.8 Organisation charts 1.9 Human resources 1.10 Management staff 1.11 Certifying personnel (see [GM2 21.A.243(d)](#_DxCrossRefBm485230841), point 2) 1.12 Independent system monitoring 1.13 Safety management system Part 2. Procedures 2.1 Management of changes to type design and design of repairs: — configuration control, — classification, and — approval of minor changes to type design and minor repairs 2.2 Control of design subcontractors 2.3 Collecting/Investigating of failures, malfunctions, and defects 2.4 Coordination with production 2.5 Documentation control — in relation to the changes and repairs, and — in relation to failures/malfunctions and defects (i.e. services bulletins) 2.6 Record-keeping