GM1 21.A.126(b)(5) Production inspection system -- Engineering and manufacturing review procedure

• ED Decision 2022/021/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

GM1 21.A.126(b)(5) Production inspection system — Engineering and manufacturing review procedure ED Decision 2022/021/R (a)     The procedure should permit to record the deviation, to present it to the design approval holder (DAH) under the provisions of point [21.A.122](#_DxCrossRefBm1649096913), and to record the results of the review and action taken consequently as regards the part/product. (b)     Any unintentional deviation from the manufacturing/inspection data should be recorded and handled in accordance with Part 21, Section A, Subpart D or E as changes to the approved design. ##### GM1 21.A.126(b)(5) Production inspection system — Engineering and manufacturing review procedure *ED Decision 2022/021/R* (a) The procedure should permit to record the deviation, to present it to the design approval holder (DAH) under the provisions of point [21.A.122](#_DxCrossRefBm485230404), and to record the results of the review and action taken consequently as regards the part/product. (b) Any unintentional deviation from the manufacturing/inspection data should be recorded and handled in accordance with Part 21, Section A, Subpart D or E as changes to the approved design.