Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
21.A.129 Obligations of the production organisation
Available versions for ERULES-1963177438-3777
Regulation (EU) 2022/201
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
Regulation (EU) 2024/1108
found in: Initial Airworthiness and Environmental Protection (748/2012) (Nov 2025)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
21.A.129 Obligations of the production organisation Regulation (EU) 2022/201 Each manufacturer of a product, part or appliance being manufactured under this Subpart shall: (a) make each product, part or appliance available for inspection by the competent authority; (b) maintain at the place of manufacture the technical data and drawings necessary to determine whether the product conforms to the applicable design data; (c) maintain the production inspection system that ensures that each product conforms to the applicable design data and is in condition for safe operation; (d) provide assistance to the holder of the type-certificate, restricted type-certificate or design approval in dealing with any continuing airworthiness actions that are related to the products, parts or appliances that have been produced; (e) comply with Subpart A of this Section.
#### 21.A.129 Obligations of the production organisation *Regulation (EU) 2024/1108* Each manufacturer of a product, part, appliance, CMU or CMU component manufactured under this Subpart shall: (a) make each product, part, appliance, CMU or CMU component available for inspection by the competent authority; (b) maintain at the place of manufacture the technical data and drawings necessary to determine whether the product, part, appliance, CMU or CMU component conforms to the applicable design data; (c) maintain the production inspection system which ensures that each product, part, appliance, CMU or CMU component conforms to the applicable design data and is in a condition for safe operation; (d) provide assistance to the holder of the type-certificate, restricted type-certificate or design approval in dealing with any continuing airworthiness actions that are related to the products, parts, appliances, CMUs or CMU components that have been produced; (e) comply with Subpart A of this Section.