GM 21.A.126(b)(4) Production inspection system - Segregation of rejected material

• ED Decision 2012/012/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

GM 21.A.126(b)(4) Production inspection system – Segregation of rejected material ED Decision 2012/020/R All materials and parts which have been identified at any stage in the manufacturing process as not conforming to the specific working and inspection instructions must be suitably identified by clearly marking or labelling, to indicate their non-conforming status. All such non-conforming material or parts should be removed from the production area and held in a restricted access segregated area until an appropriate disposition is determined in accordance with [21.A.126](#_DxCrossRefBm1649097115)(b)(5). ##### GM 21.A.126(b)(4) Production inspection system – Segregation of rejected material *ED Decision 2012/020/R* All materials and parts which have been identified at any stage in the manufacturing process as not conforming to the specific working and inspection instructions must be suitably identified by clearly marking or labelling, to indicate their non-conforming status. All such non-conforming material or parts should be removed from the production area and held in a restricted access segregated area until an appropriate disposition is determined in accordance with [21.A.126](#_DxCrossRefBm485230606)(b)(5).