21.A.97 Requirements for approval of a major change

• Regulation (EU) 2019/897 found in: Initial Airworthiness and Environmental Protection (No 748/2012) Part-21 Part-21L (Jul 2024)

21.A.97 Requirements for approval of a major change Regulation (EU) 2019/897 (a)     Major changes to a type-certificate shall be classified and approved by: 1.       the Agency; or 2.       an approved design organisation within the scope of its privileges provided for in points (1) and (8) of point [21.A.263](#_DxCrossRefBm1649096918)(c), as recorded in the terms of approval. (b)     A major change to a type-certificate shall only be approved: 1.       when it has been demonstrated that the change and areas affected by the change comply with the type-certification basis and environmental protection requirements, as established by the Agency in accordance with point [21.A.101](#_DxCrossRefBm1649096998); 2.       in the case of a change affecting the operational suitability data, when it has been demonstrated that the necessary changes to the operational suitability data meet the operational suitability data certification basis, as established by the Agency in accordance with point [21.A.101](#_DxCrossRefBm1649096998); and 3.       when compliance with points (1) and (2) has been demonstrated in accordance with point [21.A.20](#_DxCrossRefBm1649096852), as applicable to the change. (c)      By derogation from points (2) and (3) of point (b), at the applicant's request included in the declaration referred to in point [21.A.20](#_DxCrossRefBm1649096852)(d), a major change to an aircraft type-certificate may be approved before compliance with the operational suitability data certification basis has been demonstrated, provided that the applicant demonstrates such compliance before the date at which those data are actually used. (d)     An approval of a major change to a type-certificate shall be limited to the specific configuration(s) in the type-certificate to which the change relates.