AMC 21.A.20(c) Compliance documentation

• ED Decision 2019/018/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

AMC 21.A.20(c) Compliance documentation ED Decision 2019/018/R 1.       Compliance documentation comprises one or more test or inspection programmes/plans, reports, drawings, design data, specifications, calculations, analyses, etc., and provides a record of the means by which compliance with the applicable type-certification basis, the operational suitability certification basis and environmental protection requirements is demonstrated. 2.       Each compliance document should normally contain: — the reference of the certification specifications, special conditions or environmental protection requirements addressed by the document; — substantiation data demonstrating compliance (except test or inspection programmes/plans); — a statement by the applicant declaring that the document provides the proof of compliance for which it has been created; and — the appropriate authorised signature. 3.       Each compliance document should be unequivocally identified by its reference and issue date. The various issues of a document should be controlled and comply with point 21.A.55. ##### AMC 21.A.20(c) Compliance documentation *ED Decision 2019/018/R* 1. Compliance documentation comprises one or more test or inspection programmes/plans, reports, drawings, design data, specifications, calculations, analyses, etc., and provides a record of the means by which compliance with the applicable type-certification basis, the operational suitability certification basis and environmental protection requirements is demonstrated. 2. Each compliance document should normally contain: — the reference of the certification specifications, special conditions or environmental protection requirements addressed by the document; — substantiation data demonstrating compliance (except test or inspection programmes/plans); — a statement by the applicant declaring that the document provides the proof of compliance for which it has been created; and — the appropriate authorised signature. 3. Each compliance document should be unequivocally identified by its reference and issue date. The various issues of a document should be controlled and comply with point 21.A.55.