Light
Dark
System
Log In
Loading...
Compare / EASA/
Incorporated Amendments
/
Compare & Highlight Differences
21.A.4 Coordination between design and production
Available versions for ERULES-1963177438-3650
Regulation (EU) No 69/2014
found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)
Regulation (EU) 2024/1108
found in: Initial Airworthiness and Environmental Protection (748/2012) (Nov 2025)
From
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
From section
To
Initial Airworthin... (Nov 2025)
Initial Airworthin... (Jul 2024)
To section
No visible text changes
0 removals
0 additions
View
Rich
Plain
Sync scrolling
Share
From
Show details
Hide details
To
Show details
Hide details
Version
Show side by side
21.A.4 Coordination between design and production Regulation (EU) No 69/2014 Each holder of a type-certificate, restricted type-certificate, supplemental type-certificate, ETSO authorisation, approval of a change to type-certificate or approval of a repair design, shall collaborate with the production organisation as necessary to ensure: (a)    the satisfactory coordination of design and production required by [21.A.122](#_DxCrossRefBm1649096913), [21.A.130](#_DxCrossRefBm1649096912)(b)(3) and (4), [21.A.133](#_DxCrossRefBm1649096911) and [21.A.165](#_DxCrossRefBm1649096910)(c)(2) and (3) as appropriate; and (b)    the proper support of the continued airworthiness of the product, part or appliance.
#### 21.A.4 Coordination between design and production *Regulation (EU) 2024/1108* Each holder of a type-certificate, restricted type-certificate, supplemental type-certificate, ETSO authorisation, approval of a change to type-certificate or approval of a repair design, shall collaborate with the production organisation as necessary to ensure: (a) the satisfactory coordination of design and production required by [21.A.122](#_DxCrossRefBm485230404), [21.A.130](#_DxCrossRefBm485230403)(b)(3) and (4), [21.A.133](#_DxCrossRefBm485230402) and [21.A.165](#_DxCrossRefBm485230401)(c)(2) and (3) as appropriate; and (b) the proper support of the continued airworthiness of the product, part, appliance, UAS, CMU or CMU component.