ATM/ANS.AR.C.005 Certification, declaration, and verification of service providers' compliance with the requirements

• Regulation (EU) 2017/373 found in: ATM/ANS Provision of Services (2017/373) (Feb 2023)
• Regulation (EU) 2023/1771 found in: ATM/ANS Provision of Services (2017/373) (Mar 2025)

ATM/ANS.AR.C.005 Certification, declaration, and verification of service providers' compliance with the requirements Regulation (EU) 2017/373 (a)       Within the framework of point [ATM/ANS.AR.B.001(a)(1)](#_DxCrossRefBm1726554890), the competent authority shall establish a process in order to verify: (1)       service providers' compliance with the applicable requirements set out in Annexes III to XIII, and any applicable conditions attached to the certificate before the issue of that certificate. The certificate shall be issued in accordance with Appendix 1 to this Annex; (2)       compliance with any safety-related obligations in the designation act issued in accordance with Article 8 of [Regulation (EC) No 550/2004](http://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX%3A32004R0550); (3)       continued compliance with the applicable requirements of the service providers under its oversight; (4)       implementation of safety objectives, safety requirements and other safety-related conditions identified in declarations of verification of systems, including any relevant declaration of conformity or suitability for use of constituents of systems issued in accordance with [Regulation (EC) No 552/2004](http://eur-lex.europa.eu/legal-content/en/ALL/?uri=CELEX:32004R0552); (5)       the implementation of safety directives, corrective actions and enforcement measures. (b)       The process referred to in point (a) shall: (1)       be based on documented procedures; (2)       be supported by documentation specifically intended to provide its personnel with guidance to perform their tasks related to certification, oversight and enforcement; (3)       provide the organisation concerned with an indication of the results of the certification, oversight and enforcement activity; (4)       be based on audits, reviews and inspections conducted by the competent authority; (5)       with regard to certified service providers, provide the competent authority with the evidence needed to support further action, including measures referred to in Article 9 of [Regulation (EC) No 549/2004](http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CONSLEG:2004R0549:20091204:EN:PDF), Article 7(7) of Regulation (EC) No 550/2004, and by Articles 10, 25, and 68 of [Regulation (EC) No 216/2008](http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02008R0216-20130129) in situations where requirements are not complied with; (6)       with regard to service providers making declarations, provide the competent authority with the evidence to take, if appropriate, remedial action which may include enforcement actions, including, where appropriate, under national law. ATM/ANS.AR.C.005 Certification, declaration, and verification of service providers' compliance with the requirements Regulation (EU) 2023/1771 (a) Within the scope of point [ATM/ANS.AR.B.001(a)(1)](#_DxCrossRefBm647742042), the competent authority shall establish a process in order to verify: (1) service providers’ compliance with the applicable requirements set out in Annexes III to XIII, and any applicable conditions attached to the certificate before the issue of that certificate. The certificate shall be issued in accordance with Appendix 1 to this Annex; (2) the compliance with any safety-related obligations in the designation act issued in accordance with Article 8 of [Regulation (EC) No 550/2004](http://eur-lex.europa.eu/legal-content/EN/ALL/?uri=CELEX%3A32004R0550); (3) the continued compliance with the applicable requirements of the service providers under its oversight; (4) the implementation of safety, security and interoperability objectives, applicable requirements and other conditions identified in the statement of compliance for ATM/ANS equipment; technical and performance limitations and conditions identified in ATM/ANS equipment certificates and/or ATM/ANS equipment declarations; and of safety measures, including ATM/ANS equipment directives mandated by the Agency in accordance with point ATM/ANS.EQMT.AR.A.030 of Annex I to Delegated Regulation (EU) 2023/ 1768; (5) the implementation of safety directives, corrective actions and enforcement measures. (b) The process referred to in point (a) shall: (1) be based on documented procedures; (2) be supported by documentation specifically intended to provide its personnel with guidance to perform their tasks related to certification, oversight and enforcement; (3) provide the organisation concerned with an indication of the results of the certification, oversight and enforcement activity; (4) be based on audits, reviews and inspections conducted by the competent authority; (5) with regard to certified service providers, provide the competent authority with the evidence needed to support further action, including measures referred to in Article 9 of [Regulation (EC) No 549/2004](http://eur-lex.europa.eu/LexUriServ/LexUriServ.do?uri=CONSLEG:2004R0549:20091204:EN:PDF), Article 7(7) of Regulation (EC) No 550/2004, and by Articles 10, 25, and 68 of [Regulation (EC) No 216/2008](http://eur-lex.europa.eu/legal-content/EN/TXT/?uri=CELEX:02008R0216-20130129) in situations where requirements are not complied with; (6) with regard to service providers making declarations, provide the competent authority with the evidence to take, if appropriate, remedial action which may include enforcement actions, including, where appropriate, under national law.