AMC2 FCL.110.H LAPL(H) Experience requirements and crediting

• ED Decision 2026/006/R found in: Easy Access Rules for Aircrew (Oct 2026)

##### AMC2 FCL.110.H LAPL(H) Experience requirements and crediting *ED Decision 2026/006/R* **USE OF FSTDs IN LAPL(H) TRAINING** (a) If an FSTD is used in accordance with the provisions of point [FCL.110.H](#_DxCrossRefBm2072462166)(aa), it should: (1) be qualified with an FCS or an assigned FCS in its FSTD qualification certificate; (2) have all the following features at a fidelity level that is equal to, or higher than, R (representative): (i) Flight deck layout and structure; (ii) Flight controls forces and hardware; (iii) Flight controls systems operation; (iv) Aircraft systems; (v) Performance and handling on ground; (vi) Performance and handling in ground effect; (vii) Performance and handling out of ground effect; and (3) additionally, for those training tasks requiring cueing or environment simulation features, have an adequate fidelity level for the relevant features to complete such training tasks. The determination of the adequate fidelity levels should be based on an analysis of the training needs, taking into consideration the general requirements of CS-FSTD. (4) Legacy FSTDs may be used for training in accordance with the provisions of point FCL.110.H(aa), provided that the training organisation demonstrates that the FSTD represents the type of helicopter used for the skill test, taking into consideration the technical specifications of the training device included in the qualification certificate and in the equipment specification list (ESL). *[applicable from 30 April 2028 — ED Decision 2026/006/R]*