MOC VTOL.2610 Instrument markings, control markings and placards

• n/a found in: Small Category VCA (Revision 0) SC-VTOL (Oct 2024)

MOC VTOL.2610 Instrument markings, control markings and placards n/a (a) The following are accepted as a means of compliance with [VTOL.2610](#_DxCrossRefBm1877490635)(a): (1) Markings or placards should be placed close to or on (as appropriate) the instrument or control with which they are associated. (2) The terminology and units used should be consistent with those used in the Aircraft Flight Manual. (3) The units used for markings and placards should be those that are read on the relevant associated instrument. (4) Publications which are considered to provide appropriate standards for the design substantiation and certification of symbolic placards may include, but are not limited to, ‘General Aviation Manufacturers Association (GAMA) Publication No. 15 — Symbolic Messages’, Initial Issue, 1 March 2014. (5) AMC 1 to CS 23.2610 Amdt. 5 is accepted as additional MOC with [VTOL.2610](#_DxCrossRefBm1877490635)(a) (b) CS 27.1555 (a), (b)(1) and (2), and (e) Amdt.6 are accepted as means of compliance with [VTOL.2610](#_DxCrossRefBm1877490635)(b). (c) If certification with ditching provisions, emergency flotation provisions or limited over water operations is requested by the applicant, each emergency control that may need to be operated underwater should be marked with the method of operation and be marked with yellow and black stripes.