AMC1 DPO.OR.C.001(d) Organisations involved in the design or production of ATM/ANS equipment

• ED Decision 2024/002/R found in: ATM/ANS Equipment (2023/1769 and 2023/1768) Part-DPO Part-ATM/ANS.EQMT (Nov 2024)

AMC1 DPO.OR.C.001(d) Organisations involved in the design or production of ATM/ANS equipment ED Decision 2024/002/R EASA RELEASE FORM (a)       An EASA release form should be issued for ATM/ANS equipment produced by the DPO as per the organisation’s scope of work relevant to the terms of approval. (b)       Each organisation involved in the production of ATM/ANS equipment subject to conformity assessment under this Regulation should issue a statement of conformity regarding its production, using an EASA release form (see [AMC1 DPO.OR.C.001(e)](#_DxCrossRefBm1741288317)). This statement should be signed by an authorised person involved in the production of the ATM/ANS equipment. (c)       An EASA release form should contain a statement that: (1)       the finished (ready to be delivered) ATM/ANS equipment conforms to the approved design data of the ATM/ANS equipment subject to certification or declaration in accordance with [Article 4](#_DxCrossRefBm1741288244) or [Article 5](#_DxCrossRefBm1741288243) of Delegated Regulation (EU) 2023/1768 respectively; (2)       the ATM/ANS equipment has been manufactured in compliance with Implementing Regulation (EU) 2023/1769.