AMC1 21L.B.24(a)

• ED Decision 2023/013/R found in: Initial Airworthiness and Environmental Protection (748/2012) Part-21 Part-21L (Jul 2024)

AMC1 21L.B.24(a);(b) Means of compliance ED Decision 2023/013/R PROCESSING THE ALTERNATIVE MEANS OF COMPLIANCE To meet the objectives of points (b) and (c) of point [21L.B.24](#_DxCrossRefBm1649098223): (a)     the competent authority should establish the means to consistently evaluate over time that all the AltMoC that are used by itself or by organisations under its oversight allow for the establishment of compliance with the Regulation; (b)     if the competent authority issues AltMoC for itself or for the organisations under its oversight, it should: (1)     make them available to all relevant organisations; and (2)     notify EASA of the AltMoC as soon as they are issued, including the information that is described in point (d) of this AMC; (c)      the competent authority should evaluate the AltMoC that are proposed by an organisation by analysing the documentation provided and, if considered necessary, by inspecting the organisation; when the competent authority finds that the AltMoC are in accordance with the Regulation, it should: (1)     notify the applicant that the AltMoC are approved; (2)     indicate that those AltMoC may be implemented, and agree when the organisation’s processes and procedures are to be amended accordingly; and (3)     notify EASA of the AltMoC approval as soon as they are approved, including the information that is described in point (d) of this AMC; and (d)     the competent authority should provide EASA with the following information: (1)     a summary of the AltMoC; (2)     the content of the AltMoC; (3)     a statement that compliance with the Regulation is achieved; and (4)     in support of that statement, an assessment that demonstrates that the AltMoC reach an acceptable level of safety, taking into account the level of safety that is achieved by the corresponding Agency’s AMC. (e)     All these elements that describe the AltMoC are an integral part of the records to be kept, which are managed in accordance with point [21L.B.20](#_DxCrossRefBm1649098209). ##### AMC1 21L.B.24(a);(b) Means of compliance *ED Decision 2023/013/R* **PROCESSING THE ALTERNATIVE MEANS OF COMPLIANCE** To meet the objectives of points (b) and (c) of point [21L.B.24](#_DxCrossRefBm485231720): (a) the competent authority should establish the means to consistently evaluate over time that all the AltMoC that are used by itself or by organisations under its oversight allow for the establishment of compliance with the Regulation; (b) if the competent authority issues AltMoC for itself or for the organisations under its oversight, it should: (1) make them available to all relevant organisations; and (2) notify EASA of the AltMoC as soon as they are issued, including the information that is described in point (d) of this AMC; (c) the competent authority should evaluate the AltMoC that are proposed by an organisation by analysing the documentation provided and, if considered necessary, by inspecting the organisation; when the competent authority finds that the AltMoC are in accordance with the Regulation, it should: (1) notify the applicant that the AltMoC are approved; (2) indicate that those AltMoC may be implemented, and agree when the organisation’s processes and procedures are to be amended accordingly; and (3) notify EASA of the AltMoC approval as soon as they are approved, including the information that is described in point (d) of this AMC; and (d) the competent authority should provide EASA with the following information: (1) a summary of the AltMoC; (2) the content of the AltMoC; (3) a statement that compliance with the Regulation is achieved; and (4) in support of that statement, an assessment that demonstrates that the AltMoC reach an acceptable level of safety, taking into account the level of safety that is achieved by the corresponding Agency’s AMC. (e) All these elements that describe the AltMoC are an integral part of the records to be kept, which are managed in accordance with point [21L.B.20](#_DxCrossRefBm485231706).